Specifications
Electrical Input | 120 V~ / 60 Hz / 11.5 A (Peak) | |
1500 Watts | ||
| ||
Heat | Low Setting: 572° F (Maximum) | |
Temperatures | High Setting: 1112° F (Maximim) | |
Adjustable Heat | ||
Setting Type |
| |
| 71CJ | |
| E179876 |
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
Instructions for putting
into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Product Applications
1.When observing the safety rules, this Heat Gun is designed for all applications with hot air that are listed below:
•Shrinking of shrinkdown tubing, solder connectors and solder terminals, packaging and electrical components.
•Deforming of articles made from acrylic, PVC, and polystyrene tubing, plates, and profiles as well as most woods.
•Welding of thermoplastic polymer, flooring materials of PVC and linoleum,
•Soldering of tin, special silver solder, SMD elements, cable lugs, and for loosening soldered connections.
•Paint removal. Removal of old and even thick coatings of oil paint, varnish, and synthetic plaster.
•Drying of color shade samples, filter, adhesives, construction joints and stucco forms.
•Joining adhesives. Large surface gluing with contact adhesives, activation of pressure sensitive adhesives, acceleration of bonding processes, releasing of bonding points as well as releasing or bonding of edge bond or veneer.
•Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water pipes, as well as for defrosting refrigerators and ice boxes.
•Disinfection. With the tool set at 1112° Fahrenheit, animal sites/ stables may be disinfected. Woodworm infestation may be controlled (Caution: Danger of fire.
REV 08c, 10c
SKU 96289 | For technical questions, please call | Page 9 |