Features | Global Machinery Company HG2000K specification

Features:

Two Speed Rocker Switch:

The rocker switch can be adjusted to 3 positions and these are:

Position 0:

Stop/Off

Position 1: 50° - 550°C

Position 2: 50° - 650°C

Variable Temperature Control

The variable temperature control enables the temperature to be set and adjusted between 50°C and 650°C, depending upon the type of material and the work to be carried.

Temperature Indicator

The temperature indicator gives the temperature during operation. 6 LED’s are placed on the box lid. Each one represents a different temperature range:

LED No:	Colour	Temperature (C)

1	Yellow	50o
2	Yellow	100o
3	Green	200o
4	Green	350o
5	Red	500o
6	Red	650o

Note: The temperature indicator gives the temperature for reference only.

Safety Cut Out

This unit is equipped with a safety cut-out device which will operate if the internal temperature gets too high. Should this feature activate, switch off the unit and wait for the unit to cool down. When the unit has cooled sufficiently normal operation can be resumed.

PLEASE NOTE: The reset time of the hot air gun’s safety cut-out fuse is approximately 30 minutes, after which normal operation can resume.

Assembling the Wire Stand

For convenience, the wire stand should be set up before operating; therefore the tool can be rested when