VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the , nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating is harmful to the motor.
ADDITIONAL SAFETY RULES
1.Always be sure you maintain good balance and firm footing.
Be sure no one is below when using the tool in high or elevated locations.
2.Use care and common sense when disposing of sheared bolt tips. Falling tips from high locations or scattered tips can cause severe injury.
SAVE THESE INSTRUCTIONS.
4