Kawasaki 821048 manual Congratulations

Page 22

CONGRATULATIONS!

Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Service. If any help and advice is needed, please contact us at 1-800-590-3723. Properly cared for, this tool will give you many years of satisfaction.

INTENDED USE

This tool is intended for consumer use only. Your charger and/or adapter has been designed for charging batteries of the type approved and supplied with this tool.

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating, maintaining and cleaning power tools.

Always use common sense and pay particular attention to all the DANGER, WARNING, CAUTION and NOTE statements of this manual.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood.

BATTERY

Before using battery pack, please read carefully all instruc- tions and cautionary markings on battery pack, battery charg- er and product using battery.

®

Do not incinerate the battery pack even if it is severely dam- aged or is completely worn out. The battery pack can explode.

Do not carry battery packs in aprons, pockets, or tool boxes, product kit boxes, drawers, etc. with loose metal objects. battery pack terminals could be short circuited causing damage to the battery pack, severe burns or fire.

The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic material by the Environmental Protection Agency. Before disposing of dam- aged or worn out Ni-Cad battery packs, check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs, take them to your local recycling center for proper disposal, or call 1-800-822-8837.

The battery is not fully charged. Before first use, the battery pack requires 8-10 hours charge time to be fully charged. Subsequent recharging needs 3-5 hours for the battery to be fully charged.

Always switch to a fresh battery when tool performance begins to diminish. Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can have a shortened life.

Never over-discharge a battery by using the tool even after tool performance has decreased. Do not attempt to discharge a tool’s battery by continuing to pull on the tool trigger. When tool performance begins to diminish, stop the tool and recharge the battery for optimal performance.

1

2

Image 22
Contents Component #840128 Congratulations Table of ContentsRecognize Safety SYMBOLS, Words and Labels Intended USEPersonal Safety Important SafeguardsElectrical Safety Save These Instructions for Future ReferenceSafety Rules for Impact Wrenches ServiceTool USE and Care Symbol Name Explanation Specific Safety Rules AND/OR SymbolsSymbols Operating InstructionsInstalling / Removing Socket AccessoriesOther Consumer DO-IT-YOURSELF DIY Tools SpecificationsYear Limited Warranty Commercial or Rental PurposeExclusions 19.2V 2-SPEED BATTERY-OPERATED Drill General Safety Rules for ALL Battery Operated Tools Save These Instructions for Future ReferenceImportant Safeguards Personal Safety Safety Rules for Cordless Drill / Drivers Functional Description Battery Component Model NumberCharger Charging Battery Pack REMOVING/ATTACHING Battery PackAssembly Forward / Reverse and Trigger Lock Lever This Tool is Controlled By a Trigger SwitchBuilt in LED Lamp Operating the DrillDrilling Metal Torque SettingsScrewdriving Drilling Masonry High / LOW Speed Gear ShiftingScrewdriving Conductor Size in A.W.GBatteries Year Limited Home USE WarrantyProtecting the Environment Which Extend Beyond the Description on the Face HereofExclusions Component #840051 Congratulations Symbols Year Limited Home USE Warranty Warranty Disclaimers