Kawasaki 840150 manual Maintenance and Cleaning, Accessories, Tool Current Rating, Specifications

Page 9

MAINTENANCE AND CLEANING

Always remove the battery pack before attempting cleaning or maintenance.

This Cordless Impact Wrench is lubricated before it leaves the factory. This lubrication should last for the life of the tool. No further lubrication is required.

Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear.

Always clean the battery pack using only a dry cloth. Do not use liquids. Always unplug the charger before cleaning it.

Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth.

Never open the Cordless Impact Wrench case, battery pack or charger. Do not attempt to repair the Cordless Impact Wrench, battery pack or charger yourself. Opening any of these parts will void your warranty.

ACCESSORIES

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry the amount of current necessary for your power tool. If not, your tool may experience a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord (see table below).

RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS

TOOL CURRENT RATING

 

CONDUCTOR SIZE IN A.W.G

 

AMPERE

10FT.

25FT.

50FT.

100FT.

3-6

18

18

18

18

6-8

18

18

18

16

8-10

18

18

18

14

10-12

16

16

14

14

12-16

14

12

12

-

16-20

12

12

12

-

 

SPECIFICATIONS

 

 

 

 

 

SPECIFICATIONS

 

 

Voltage

14.4V

 

 

 

 

 

 

 

Speed

0-2500 rpm

 

 

Impacts Per Minute

3000

 

 

 

 

Maximum Torque

130 ft.lbs.

 

 

Charger Input

120V

60Hz

 

Charging Time

Approx. 1 Hour

Battery Type

Ni-Cad

 

 

PROTECTING THE ENVIRONMENT

BATTERIES

Alltrade batteries can be recharged many times. At the end of their useful life, recy- cle batteries with due care for our environment.

Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.

OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS

Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would like further information on the following products, please contact Alltrade Customer Service Department at 1-800-590-3723.

Cordless Drills/Screwdrivers

Impact Wrenches

Sanders

Jigsaws

Circular Saws

Angle Grinders

Reciprocating Saws

Routers

Rotary Tools

Corded and Cordless Multi-Purpose Tools

Wide Range of Accessories and more

15

Image 9
Contents 14.4V BATTERY-OPERATED Impact Wrench General Safety RULES-FOR ALL Battery Operated Tools Table of ContentsRecognize Safety SYMBOLS, Words and Labels CongratulationsElectrical Safety Important SafeguardsSave These Instructions for Future Reference Work AreaService Personal SafetySpecific Safety Rules AND/OR Symbols Safety Rules for Impact WrenchesSymbol Name Explanation SymbolsFunctional Description BatteryControls and Components Component Model NumberAttach Battery Pack Removing / Attaching Battery Pack Charging Battery PackCharger Important Information for Recharging HOT BatteriesInstalling / Removing Socket on the Anvil Assembly Variable Speed Trigger SwitchOperating the Impact Wrench Forward / Reverse and Trigger Lock LeverAccessories Maintenance and CleaningSpecifications Tool Current RatingCommercial or Rental Purpose Year Limited WarrantyWarranty Disclaimers 14.4V Battery Pack Congratulations Symbols Which Extend Beyond the Description on the Face Hereof Year Limited Home USE WarrantyWarranty Disclaimers