|
| 002376 Use a screwdriver to remove the brush holder caps. Take out |
| 1 | the worn carbon brushes, insert the new ones and secure |
| the brush holder caps. | |
|
| |
|
| After replacing brushes, insert the battery cartridge into the |
|
| tool and break in brushes by running tool with no load for |
2 |
| about 1 minute. Then check the tool while running and elec- |
| tric brake operation when releasing the switch trigger. If elec- | |
|
| |
1. Brush holder cap |
| tric brake is not working well, ask your local Makita service |
| center for repair. | |
2. Screwdriver |
| |
| To maintain product SAFETY and RELIABILITY, repairs, any | |
|
| |
|
| other maintenance or adjustment should be performed by |
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
Ni-Cd
Recycling the Battery
The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal.
To recycle the battery:
1.Remove the battery from the tool.
2.a) Take the battery to your nearest Makita Factory Ser- vice Center
or
b)Take the battery to your nearest Makita Authorized Service Center or Distributor that has been desig- nated as a Makita battery recycling location.
Call your nearest Makita Service Center or Distributor to determine the location that provides Makita battery recycling. See your local Yellow Pages under
ACCESSORIES
CAUTION:
•These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
•Various type of Makita genuine batteries and chargers
•Set plate
•Shoulder strap
•Plastic carrying case
12