Personal Safety

still does not fit, contact a qualified elec- trician to install a polarized outlet. Do not change the plug in any way. Double insula-

tion eliminates the need for the three wire grounded power cord and grounded power supply system.

5.Avoid body contact with grounded sur- faces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

8.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

9.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

10.Dress properly. Do not wear loose cloth- ing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

11.Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

12.Remove adjusting keys or wrenches before turning the tool on. A wrench or a

key that is left attached to a rotating part of the tool may result in personal injury.

13.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

14.Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Ordinary eye or sun glasses are NOT eye protection.

Tool Use and Care

15.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

16.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

17.Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

18.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

19.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

20.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

21.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool ser- viced before using. Many accidents are caused by poorly maintained tools.

6951 specifications

The Makita 6951 is a versatile and high-performance cordless drill, designed to meet the needs of both professionals and DIY enthusiasts alike. This powerful tool offers a variety of features and technologies that enhance its usability and efficiency, making it a preferred choice for a wide range of applications.

One of the standout features of the Makita 6951 is its robust brushless motor. This technology not only provides more power and efficiency but also reduces the need for maintenance, as there are no brushes to wear out. The brushless motor delivers a significant amount of torque, allowing users to tackle tough drilling and fastening tasks with ease. The variable speed control means that users can adjust the drill's speed based on the specific material they are working with, ensuring optimal performance every time.

Another key aspect of the Makita 6951 is its ergonomic design. The tool is built with a comfortable grip that reduces fatigue during extended use. The lightweight construction further enhances portability, making it easy to maneuver in tight spaces or overhead applications. Additionally, the integrated LED light illuminates the work area, making it easier to see what you're doing, especially in low-light conditions.

Battery life is essential for cordless tools, and the Makita 6951 does not disappoint in this area. It is compatible with Makita's 18V lithium-ion battery platform, which provides longer run times and quicker charging times. This ensures that users can work longer without interruptions, making it an efficient choice for demanding job sites.

The Makita 6951 also features a two-speed gear mechanism, allowing for a broad range of speed settings. This makes it suitable for various tasks, from drilling holes to driving screws. The high-torque setting is perfect for tough materials, while the low speed is ideal for delicate tasks that require precision.

Durability is another hallmark of the Makita brand, and the 6951 is no exception. Designed with high-quality materials, it is built to withstand the rigors of daily use on job sites. Its compact and sturdy design ensures long-lasting performance, while also being resistant to wear and tear.

In summary, the Makita 6951 cordless drill combines a powerful brushless motor, ergonomic design, efficient battery technology, and versatility, making it an excellent choice for a wide range of tasks. Whether you are a professional contractor or a home improvement enthusiast, this tool is engineered to deliver reliable performance and durability in any situation.