Earlex HG2000 Mains Connection, EqUIPMENT kNOWN AS Weee, EC Declaration of Conformity

Page 4

MAINS CONNECTION

This unit is a Class II appliance which means it is double insulated for your protection. No earthing wire is necessary.

If the supply cord is damaged, it must be replaced by Earlex Ltd or our appointed agents. Please read the following safety instructions before use.

1.If the plug is cut off from the mains lead then the plug must be disposed of safely. NEVER under any circumstances insert such a plug into a 13 amp socket-outlet.

2.A replacement fuse must be rated at 13 amp and manufactured and approved to BS 1362.

3.IF IN ANY DOUBT CONTACT A qUALIFIED ELECTRICIAN.

If you need to fit a plug to the mains lead, this should be fitted in accordance with the wiring instructions below and will need to be used with a 13 amp fuse. If in doubt consult a qualified electrician.

If you are using an extension lead it must be rated at a minimum of 10 amps and fully unwound. Do not operate with a lead rated at less than 10 amps as this will cause premature component failure which is not covered by the guarantee.

As the colours of the wires in the mains lead of the application may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.The wire which is coloured brown must be connected to the terminal which is marked

with the letter L or coloured red.

INFORMATION ON THE DISPOSAL OF WASTE ELECTRICAL & ELECTRONIC

EqUIPMENT kNOWN AS WEEE

Your attention is brought to new directives applicable to the disposal of this electrical equipment, where in accordance with the legislation this product must not be disposed of in your normal household waste. Instead it is your responsibility to dispose of this type of waste by handing it over to special designated collection points for recovery and recycling. This product is marked with a ‘Wheelie bin’ symbol with a cross on it to remind you of this action. The objective of this directive is to help conserve resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste please contact your local authority. Take back facilities are free of charge.

GUARANTEE

This heat gun is guaranteed for a period of 12 months against faulty manufacture or materials. It is not guaranteed for industrial or hire purposes. The nozzles are classed as consumables and are not covered by guarantee. This guarantee does not affect your statutory rights. In the event of any problem occurring please contact us on our Helpline on

01483 454666

Monday-Friday 08:30 -17:00 (Excluding Bank Holidays) or e-mail: enquiries@earlex.co.uk

EC Declaration of Conformity

We declare that the unit: HG2000 conforms to: LVD 2006/95/EC EN60335-2-45, EMC 2004/108/EC, EN61000-3-2, EN61000-3-3, EN55014-1, EN55014-2 & EMF EN62233

Tim Hopper - Technical Director

Earlex reserves the right to modify or improve this product without prior notice.

Colours may vary from those shown.

For information on other products in the Earlex range, please contact us at the address below or visit our

website at: www.earlex.com

 

 

Earlex Limited,

 

 

 

Opus Park, Moorfield Road, Guildford, Surrey, GU1 1SZ, UK

 

 

 

Tel: +44 (0) 1483 454666. Fax: +44 (0) 1483 454548.

 

 

 

Email: enquiries@earlex.co.uk Web: www.earlex.com

 

©Earlex Ltd. 2011

G118 01/11

 

 

 

 

Image 4
Contents Earlex HG2000 Heat Settings Technical SpecificationAbout the HG2000 Operation EqUIPMENT kNOWN AS Weee Mains ConnectionEC Declaration of Conformity
Related manuals
Manual 12 pages 13.22 Kb