Unpacking
When unpacking your Heat Gun in Blowmold Case, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHTTOOLS at
Parts List
1 | Left Housing | 1 | 25 | Heating Wire | 1 |
2 | Switch | 1 | 26 | Ceramic Tube | 1 |
3 | Shock Proof Pad | 2 | 27 | Washer | 1 |
4 | Diode | 4 | 28 | Connector Piece | 3 |
5 | Motor | 1 | 29 | Mica Paper | 1 |
6 | Tapping Screw | 2 | 30 | Air Duct | 1 |
7 | Screw | 2 | 31 | Air Locking Ring | 1 |
8 | Fan | 1 | 32 | Nose Cone | 1 |
9 | Tapping Screw | 3 | 33 | Tapping Screw | 1 |
10 | Vent VRI | 1 | 34 | Motor Support | 1 |
11 | Regulator | 1 | 35 | Label | 1 |
12 | Capacitor | 2 | 36 | Wood Handle w/Threaded End | 1 |
13 | Circuit Board | 1 | 37 | Nut | 1 |
14 | Wire Conductor | 1 | 38 | Nut | 1 |
15 | Tapping Screw | 2 | 39 | Triangle Shaped Scraper | 1 |
16 | Wire Strain Plate | 1 | 40 | 3 Sided Scraper | 1 |
17 | Right Housing | 1 | 41 | Pear Shaped Scraper | 1 |
18 | Ring | 1 | 42 | Wooden Handle Putty Knife | 1 |
19 | Sheath | 1 | 43 | Outlet Diameter Reducer | 1 |
20 * | Power Cord | 1 | 44 | 1 | |
21 | Tapping Screw | 5 | 45 | 1 | |
22 | Fix Sleeve | 1 | 46 | 1 | |
23 | Ceramic Tube | 1 |
|
|
|
24 | Cover | 2 |
|
|
|
Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
*Power Cord only available with Sheath (19). Sold only as an assembly.
ITEM 47269 | Page 11 |