Important Rules for Battery Tools

■Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Do not place battery tools or their batteries near fire or heat. They may explode. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Do not charge battery tool in a damp or wet location. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°F. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar, If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.

Important Safety Instructions For Charger

■Save these instructions. This manual contains important safety and operating Instructions for battery charger part number 9-11040 (981399-001).

Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■To reduce risk of injury, charge only nickel-cadmium and nickel metal hydride type recharge able batteries. Other types of batteries may burst causing personal injury and damage. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Do not expose charger to rain or snow. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■To reduce risk of damage to charger body and cord, pull by charger plug rather than cord when disconnecting charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

■Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Following this rule will reduce the risk of serious personal injury.

■An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

310.26825 specifications

The Craftsman 310.26825 is a versatile and powerful air compressor designed to meet the needs of both professionals and DIY enthusiasts. This unit is particularly known for its reliability and impressive performance, making it a sought-after tool in various applications such as home improvement, automotive maintenance, and woodworking.

One of the standout features of the Craftsman 310.26825 is its robust motor, which is capable of delivering a maximum PSI of 150. This allows for efficient inflation of tires, powering nail guns, and other air-powered tools, ensuring optimal performance during tasks. The unit is equipped with a 3-gallon tank, providing ample air storage for extended use while maintaining a compact design that makes it easy to transport and store.

The air compressor utilizes a direct drive motor, which not only enhances its efficiency but also minimizes noise levels, making it suitable for use in residential areas without causing disturbance. This quiet operation is further complemented by the oil-free pump technology, which reduces maintenance needs and eliminates the hassle of oil changes. The oil-free design also contributes to a cleaner work environment, making it a user-friendly option for various settings.

Another notable characteristic is the quick recovery time. The Craftsman 310.26825 is designed to maintain consistent air pressure, allowing users to complete jobs without unnecessary interruptions. The compressor features a pressure regulator and dual quick couplers, enabling simultaneous operation of two air tools, thereby maximizing productivity.

Safety is a priority with the Craftsman 310.26825, as it comes equipped with built-in safety features, including a thermal overload protector, which prevents the motor from overheating during extended use. This ensures longevity and reliability, allowing users to work with confidence.

Overall, the Craftsman 310.26825 air compressor stands out for its powerful performance, user-friendly design, and essential safety features. Its combination of a robust motor, oil-free pump, and quick recovery time makes it an excellent choice for anyone looking to tackle various air-compressor-driven tasks efficiently and effectively. Whether you are inflating tires, operating air tools, or completing home projects, the Craftsman 310.26825 delivers the performance and reliability that users demand from a high-quality air compressor.