|
|
|
|
|
| Specifications | |
|
|
|
|
| Drive Size | 97925:1/2" |
|
| 99676: 3/8” |
| |
|
|
| |
| Charger Input | 120 V~, 60 Hz, 80W |
|
| Charge Time | 97925: 1 Hour |
|
| Speed | 97925: |
|
| 99676: |
| |
|
|
| |
| Maximum Torque | 97925: 350 |
|
| 99676: 200 |
| |
|
|
| |
| Battery Cell Type | 19.2 V, NiCd, 2.0 Ah |
|
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
List of contents
Description | Qty |
Impact Wrench | 1 |
Charger | 1 |
Battery | 1 |
Blow Mold Case | 1 |
Set Up Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
| To prevent serious injury from accidental | |
WARNING | ||
operation: | ||
|
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Tool Features
1.Always make sure the Trigger of the Impact Wrench is not depressed, the Forward/ Reverse Switch is in the center, locked position, the Battery is removed from the
SKU 97925, 99676 For technical questions, please call | Page 10 |