4.Fill the Fuel Tank approximately 3/4 full with the fuel mix (the Fuel Tank capacity is approxiately 34 ounces). Then, replace the Tank Cap (93). (See Figure B.)
5.
WARNING! NEVER attempt to fill the Fuel Tank when the Engine is running or hot to the touch.
TANK CAP
(93)
FIGURE B
To Fill The Gear Case With Gear Oil:
1.Prior to each use of the Impact Wrench, the Gear Case (209D) must be checked and, if necessary, filled with clean #10 gear oil. To check the level of gear oil in the Gear Case, observe the Gear Oil Port (210D) window located on the side of the Gear Case. The gear oil level should be centered in the window. If the level is lower than the center of the window, add #10 gear oil until its level is centered in the window. (See Figure C.)
FIGURE C
GEAR OIL PORT
(210D)
SKU 95666 For technical questions, please call