![](/images/new-backgrounds/1302527/3025279x1.webp)
Assembly
Place the Handle (45) onto the side of the Hammer Case (43) and secure it with four Screws (46) and Washers (46A). See FIGURE 1.
FIGURE 1
Securing with
Screws (46) and
Washers (46A)
(Hex Wrench not included)
Operation
Warning!! This Impact Wrench supplies powerful torque and is designed to be operated with two hands. Failure to operate the Impact Wrench with two hands may result in serious, per- manent injury. See FIGURE 3 below.
FIGURE 2 | Trigger (13) |
|
Anvil (38)
Screw (46) and
Washer (46A)
Side Handle (45) |
| Air Inlet (10B) |
| ||
| ||
|
| Forward/Reverse Valve (17) |
FIGURE 3
Proper way to hold the Impact Wrench
SKU 92421 | For technical questions, please call | Page 5 |