Maintenance
1.Make sure your Impact Wrench is disconnected from the air hose before attempting any maintenance.
2.Wipe the Impact Wrench down with a lint free cloth after each use.
3.Make sure the Anvil (6) is clear of dirt or debris. If possible, spray it with compressed air before each use.
4.Periodically, add a high quality machine oil to the oil inlet by removing the Oil Screw (39). See illustration, below.
5.If you do not use an inline oiler/filter system, lubricate the tool daily by holding it so that the Air Inlet (29) is facing up. Squeeze the Trigger (34), and place one or two drops of oil into the Air Inlet (29). Squeezing the Trigger (34) allows the oil to circulate in the motor.
Anvil (6)
Oil Screw
(39)
Trigger (34)
Air Regulator (32) | Air Inlet (29) |
SKU 93296 | For technical questions, please call | Page 6 |