Harbor Freight Tools 92622 operating instructions Maintenance, Parts List

Page 7

Maintenance

1.After each use, wipe the Impact Wrench with a clean cloth to remove any dirt and grease buildup.

2.To maintain tool life, always lubricate the air line by adding a few drops of pneumatic tool oil to the air line (or Air Inlet) before each use. Or, install the automatic oiler-filter system as illustrated on page 5.

3.Before each use, drain water out of the air compressor tank and condensation from the air lines. Refer to the Air Compressor Operation Manual.

4.Store the Impact Wrench in a clean and dry location.

Parts List

NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.

SKU 92622

For technical questions, please call 1-800-444-3353

Page 7

Image 7
Contents 92622 For technical questions and replacement parts, please callSave This Manual SpecificationsSafety Warnings and Precautions Read all instructions before using this toolFor technical questions, please call Unpacking Impact Wrench Safety PrecautionsOiler and Filter Connection AssemblyMount Handle Air ConnectionOperation Parts List MaintenancePlease Read the Following Carefully Assembly Drawing