Harbor Freight Tools 68128 Specifications, Initial Tool Set Up Assembly, Unpacking

Page 6

3.Wear suitable gloves to reduce the vibration effects on the user.

4.Use tools with the lowest vibration when there is a choice.

5.Include vibration-free periods each day of work.

6.Grip tool with both hands as lightly as possible (while still keeping safe con- trol of it). Let the tool do the work.

7.To reduce vibration, maintain tool as explained in this manual. If abnormal vibration occurs, stop immediately.

Save these instructions.

Specifications

Maximum Air Pressure

90 PSI

Air Inlet

1/2” -14 NPT

Drive Size

1”

Maximum Speed*

3200 RPM / 557 BPM

(Blows Per Minute)

 

Average Air

10 CFM @ 90 PSI

Consumption

 

Recommended Min.

1/2” (Not Supplied)

Air Hose

 

Torque

2000 ft.-lb.

Speed Settings

Three

*Maximum speed at stated maximum air pressure. Ex- cess air pressure is hazardous and may cause the tool to exceed stated maximum speed.

Recommended Min. Air Hose: 1/2” (Not Supplied)

Initial Tool Set Up/

Assembly

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Unpacking

When unpacking, make sure the item is intact and undamaged. If any parts are missing or broken, call Harbor Freight Tools at 1-800-444-3353.

This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up.

SKU 68128

For technical questions, please call 1-800-444-3353.

Page 6

Image 6
Contents For technical questions or replacement parts, please call Pinless AIR Impact WrenchGeneral Safety Alert Symbol and Signal WordsSave This Manual Work areaPersonal safety Use safety equipment. aTool use and care Air source ServiceSymbol Definitions MinSpecific Safety Instructions Vibration PrecautionsSpecifications Initial Tool Set Up AssemblyUnpacking Air Supply Recommended Air Line ComponentsInjury from accidental operation Operating Instructions Tool Set UpWork Piece and Work Area Set Up General Operating InstructionsDo not exceed tool’s maximum air pressure rating 90 PSI User-Maintenance Instructions Troubleshooting Problem Possible Causes Likely SolutionsSKU For technical questions, please call Parts List Part Description ’tyRecord Product’s Serial Number Here Assembly Diagram Limited 1 Year warranty