3.Daily: With a soft brush, cloth, or vacuum, remove all dust and debris from the Ratchet Wrench. Then, use a premium quality, lightweight machine oil to lubricate all external moving parts.
4.
CAUTION! All maintenance, service, or repairs not listed in this manual are only to be attempted by a qualified service technician.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
PARTS LIST
Part # | Description |
1 | Motor Housing |
2 | Valve Bushing |
3 | O Ring |
4 | O Ring |
5 | Throttle Valve |
6 | Spring |
7 | O Ring |
8 | Air Valve Cap |
9 | Exhaust Sleeve |
10 | Air Inlet |
11 | Throttle Lever |
12 | Bearing |
13 | Rear End Plate |
14 | Pin |
15 | Pin |
16 | Cylinder |
17 | Rotor |
18 | Rotor Blade |
19 | Front End Plate |
20 | Roll Pin |
21 | Bearing |
Part # | Description |
22 | Planet Gear |
23 | Planet Pin |
24 | Gear Cage |
25 | Internal Gear |
26 | Clamp Nut |
27 | Ratchet Housing |
28 | Needle Bearing |
29 | Drive Bushing |
30 | Ratchet Yoke |
31 | Washer |
33 | Forward/Reverse Knob |
34 | Reverse Spring |
35 | Reverse Pin |
36 | ¼” Ratchet Anvil |
37 | Ratchet Pawl |
38 | Pin |
39 | Spring |
40 | Ball |
41 | Thrust Washer |
42 | Retaining Ring |
43 | Grip |
SKU 93821 | For technical questions, please call | PAGE 8 |