5.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended.
6.Dress properly while working. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically
7.Use eye, face and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. Wear ANSI approved ear plugs.
8.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines.
9.Maintain tools with care. Keep tools clean and in good condition for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool fittings and hoses periodically and, if damaged, have them repaired by an authorized technician.The handles must be kept clean, dry, and free from oil and grease at all times.
10.Disconnect power. Disconnect from air pressure source when not in use.
11.Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before connecting it.
12.Avoid unintentional starting. Be sure the Butterfly Throttle Switch is in the neutral, OFF position when not in use and before attaching to pressure source. Do not carry any tool with your finger on the Butterfly Throttle Switch, whether it is attached or not.
13.Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.
14.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if the Butterfly Throttle Switch does not function properly.
SKU 93100 For technical questions please call