Unpacking, Operation | Harbor Freight Tools 92349 guide

Unpacking

When unpacking, check to make sure the parts listed on page 7 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.

Operation

WARNING! Running engines produce carbon monoxide, an odorless, colorless gas that is extremely toxic. Exposure to carbon monoxide can result in headaches, dizziness, vomiting, and even death. The engine must only be run in an open, well-ventilated place.

1.Prior to use, be sure that your vehicle or other work object is safely secured in preparation for maintenance.

2.This tool operates on 12 Volts DC. Do not attempt to use this tool with any other voltage.

3.You may connect to the 12 Volt power source by directly plugging in the 12 Volt Plug-In (24) to the vehicle’s receptacle, or, you may use the Battery Adapter Cable. To use the Battery Adapter Cable, simply insert the 12 Volt Plug-In into the Adapter. When it is safe to do so, connect the RED clamp to the POSITIVE terminal of a 12 volt battery. Connect the BLACK clamp to a clean grounded part of the vehicle such as the engine block or frame member. NEVER leave either clamp attached to the vehicle while the impact wrench is not being used; disconnect clamps immediately as soon as work is finished. Also, make certain that neither clamp can come into contact with any other wire or metal portion of the vehicle’s engine. See FIGURE 1.

NOTE: If the engine is left running while performing this operation, be sure to avoid placing any cables or clamps, or your hands, clothes, hair or any other appendage in close proximity to the moving parts of the engine.

	FIGURE 1	FIGURE 2
	FIGURE 1	Clamp
		Clamp

Anvil (4)

Trigger (26)

Adapter (40)

12Volt Plug-In (24)

12 Volt

Plug-In (24)

SKU 92349

For technical questions, please call 1-800-444-3353

Page 4