Quick Set‐up

Note: This is a brief outline for getting started. Please refer to the full manual at www.iOptron.com for details.

2) Up

1)South

Step 1.

Extend tripod legs to full extension.

Step 2.

Attach mount to tripod using the long bolt (#7). Slide tray on bottom of shaft. Then screw on round black knob (#9).

Step 3.

Attach telescope to mount using dovetail lock (#2).

Step 4.

Set telescope to PARK POSITION. (1) Position the mount so that the “S” is facing south. (2) The telescope tube should be pointed directly up at the zenith. If it is not perfectly straight then loosen the altitude lock (#4) to adjust telescope.

Step 5.

Level the mount using the bubble on side of mount by adjusting tripod legs. It is also suggested to use additional levels to assure very precise level.

iOptron Corp. 6F Gill Street Woburn, MA 01801 USA (781) 935‐2800 Toll Free (866) 399‐4587 www.iOptron.com