SPECIFICATIONS
Construction: | Hand held ABS pistol type ultrasonic processor |
| stainlesssteelsensorenclosures |
Circuitry: | SMD/Solid State hybrid hetrodyne receiver |
FrequencyResponse: | |
Indicator: | 10 segment LED bargraph (red) |
Sensitivity Selection: | 8 position precision attenuation |
Power: | 9 volt alkaline battery |
Low Battery | LED |
VoltageIndicator: | |
Headset: | Noise isolating type: double headset wired monophonic |
| Impedence: 16 ohms. Over 23 dB noise attenuation. |
| Meets or exceeds ANSI specifications and OSHA standards. |
Transmitter: | Patented warble tone transmission. |
Response time: | 300m.sec. |
Ambient Operating | 32o - 120o F(0o - 50o C) |
Temperature Range: | |
Relative Humidity: | 10 - 95% noncondensing at up to 86oF (30oC) |
Storage Temperature: | 0o - 130oF |
Dimensions: | 5.5" x 1" x 7.9" |
Weight: | 10 oz. |
Probes: | Stainless Steel unisonic (single transducer) piezo electric crystal type |
Scanning Module | |
Stethoscope(contact)Module: | Stainless Steel |
Rubber Focusing Probe: | Circular shaped, shields stray ultrasound signals, focuses detected signals |
Carrying Case: | ABS plastic with die cut foam |
Warranty: | one year, parts/labor, excluding abuse(details available on request). |