Harbor Freight Tools 04328 operating instructions Symbology, Figure C

Page 9

6.If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

7.Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.

8.Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.

FIGURE C

SYMBOLOGY

V~

A

Double Insulated

Canadian Standards Association

Underwriters

Laboratories, Inc.

Volts Alternating Current

Amperes

no

No Load Revolutions

xxxx/min.

per Minute (RPM)

 

SKU 04328

PAGE 9

Image 9
Contents Soldering GUN KIT 180 Watt with Light General Safety Rules Product SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetyTool USE and Care Service Specific Safety RulesPage Grounded Tools Tools with Three Prong Plugs GroundingDouble Insulated Tools Tools with TWO Prong Plugs Extension CordsFigure C SymbologyUnpacking Assembly and Operating InstructionsPage INSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Assembly Diagram