Porter-Cable 126 instruction manual Maintenance, Keep Tool Clean, Failure to Start, Lubrication

Page 14

MAINTENANCE

KEEP TOOL CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while using compressed air.

FAILURE TO START

Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

LUBRICATION

This tool has been lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. No further lubrication is necessary.

BRUSH INSPECTION (If applicable)

For your continued safety and electrical protection, brush inspection and replacement on this tool should ONLY be performed by an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER-CABLE•DELTA FACTORY SERVICE CENTER.

At approximately 100 hours of use, take or send your tool to your nearest authorized Porter-Cable Service Station to be thoroughly cleaned and inspected. Have worn parts replaced and lubricated with fresh lubricant. Have new brushes installed, and test the tool for performance.

Any loss of power before the above maintenance check may indicate the need for immediate servicing of your tool. DO NOT CONTINUE TO OPERATE TOOL UNDER THIS CONDITION. If proper operating voltage is present, return your tool to the service station for immediate service.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Planer Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Symbol Definition Motor Extension Cord SelectionTo Install the Cutter Carton ContentsAssembly Operation Functional DescriptionAdjusting the Cutter Adjusting for Depth of CUTApron Stop Stud Making the CUTBevel Cutting Planing AN Uneven Board Fitting a DoorPlywood Edges Troubleshooting Adjusting the CUTTER-ADJUSTING Lever TensionFailure to Start MaintenanceKeep Tool Clean LubricationReplacement Parts Service and Repairs ServiceAccessories Warranty PORTER-CABLE Limited ONE Year Warranty

126 specifications

The Porter-Cable 126 is a versatile and powerful tool designed for both professionals and hobbyists in the woodworking and construction industries. This dependable machine is particularly recognized for its efficiency and ease of use, making it a preferred choice among carpenters and DIY enthusiasts alike.

One of the main features of the Porter-Cable 126 is its robust motor, which delivers an impressive performance, allowing users to tackle a wide range of applications. With a reliable power output, the tool can handle heavy-duty tasks with ease, whether it's for cutting, drilling, or fastening. This capability makes it suitable for both light and heavy materials, enhancing the versatility of the tool.

Another notable aspect of the Porter-Cable 126 is its user-friendly design. The tool is engineered with a comfortable grip, ensuring that operators can maintain control even during extended use. The balance and weight distribution have been optimized to reduce fatigue, providing users with the ability to work longer without discomfort. This is particularly important for professionals who rely on the tool for day-to-day operations.

The technology embedded within the Porter-Cable 126 further enhances its performance. It features a powerful and efficient motor that operates at high RPMs, providing exceptional cutting speeds that help to improve overall productivity. Additionally, its precision engineering ensures that users achieve accurate results, making it an ideal choice for detailed woodworking tasks.

Safety features are also an integral part of the Porter-Cable 126's design. Equipped with protective guards and a safety switch, the tool helps to minimize the risk of accidents, which is crucial when working with sharp blades and heavy materials. This commitment to safety allows users to focus on their tasks with confidence.

Furthermore, the Porter-Cable 126 is compatible with a wide range of attachments and accessories, making it highly adaptable for various projects. Whether users are engaged in woodworking, metalworking, or general construction, the tool can accommodate different needs and preferences.

In conclusion, the Porter-Cable 126 stands out as a reliable and powerful tool in the market, characterized by its strong motor, user-friendly design, advanced technology, and emphasis on safety. Its versatility and adaptability make it an essential addition to any workshop, catering to a diverse array of projects with efficiency and precision. Whether used by professionals or DIY enthusiasts, the Porter-Cable 126 is poised to deliver excellent results.
Top Page Image Contents