Powermatic manual 201 22 Planer

20122" Planer

This 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5" dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. ■ The well designed infeed and outfeed rollers are fitted with roller bearings for long roller life. The sectional infeed and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed roller facilitates both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. ■ The two-speed gearbox with machined detents

is quickly changed up front when switching from rough to finish work. You may easily raise the massive ribbed cast iron, ground finished table 1/16" with each turn of the hand wheel. ■ The model 201 is available with 71/2 horsepower, 3-phase 230 or

460volt or 71/2 horsepower, single- phase motors. This planer is perfect for the small to medium shop with continuous planing requirements.

The Gold Standard Since 1921.

FEATURE	BENEFIT
All cast iron construction
1,300 lb.	Solid, rigid, accurate with no vibration
2 feed speeds — 20/30 fpm	Accommodates rough and fine
	finish work
Segmented infeed roller with	Allows multiple piece planing and
sectional chip breaker	consistent feed and finish
4-knife head — 22" wide	Fine finish cuts at 19,200 per minute
	and widest capacity in its class
Roller bearing feed rollers	Insure long trouble-free use of machine
Adjustable bed rollers	Allow smooth feeding of rough and
	finished workpieces
Heavy cast iron table travels	Offers full support for large workpieces.
on 2 large lead screws	1 handle turn = 1/16"

Large diameter 4-knife	Heavy-duty, oil bath	Oversized table with fully
cutterhead, sectional infeed	2-speed gearbox transmits	adjustable easy set bed
roller and chip breaker with	full power to feed rollers.	rollers. Large inch/metric
roller bearing support on		scale for easy viewing.
both infeed and outfeed
rollers.

WMH TOOL GROUP