Cutterhead |
|
Type | TEFC Capacitor Start Induction |
Horsepower | 5 HP |
Voltage | 220V |
Prewired | 220V |
Phase | Single |
Amps | 28A |
Speed | 3450 RPM |
Cycle | 60 Hz |
Number Of Speeds | 1 |
Power Transfer | Belt Drive |
Bearings | Shielded and Lubricated |
Main Specifications: |
|
Operation Info |
|
Max. Cut Width | 20 in. |
Max. Cut Height | 9 in. |
Min. Stock Length | 10 in. |
Min. Stock Width | 1/4 in. |
Max. Stock Thickness | 9 in. |
No. Of Cuts Per Inch | 42 - 84 |
No. Of Cuts Per Minute | 20000 |
Cutterhead Speed | 5000 RPM |
Planing Feed Rate | 20 - 40 FPM |
Max. Cut Depth Planing Full Width | 3/16 in. |
Max. Cut Depth Planing 6 Inch Wide Board | 5/16 in. |
Cutterhead Info |
|
Cutterhead Type | 4 Knife |
Cutterhead Dia | |
No. Of Knives | 4 |
Knife Type | HSS |
Knife Size Length | |
Knife Size Width | |
Knife Size Thickness | 1/8 in. |
Knife Adjustment | Gibs and Jack Screws |
Table Info |
|
Table Movement | 1/4 - 9 in. |
Table Bed Size Length | 24 in. |
Table Bed Size Width | |
Table Bed Size Thickness | 5 in. |
No. Of Bed Rollers | 2 |
Floor To Table Height | 24 - 33 in. |
Construction |
|
Table Construction | Precision Ground Cast Iron |
Body Construction | Cast Iron |
Cutterhead Assembly Construction.... One Piece Machined Steel Shaft; 4 Knife Slots; Shielded Ball Bearings | |
Infeed Roller Construction | Segmented Steel |
Outfeed Roller Construction | Polished Steel |
Paint | Epoxy |
Other |
|
Table Locks | One Positive |
Measurement Scale | Inch and Metric |
No. Of Dust Ports | 1 |
Dust Port Size | 5 in. |
Model G9967 | The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications. | PAGE 2 OF 3 |
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. |