FUNCTIONAL DESCRIPTION
CAUTION:
•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
Adjusting depth of cut
1 | 1. Knob |
To stop the tool from the locked position, pull the switch trigger fully, then release it.
For tool with lock-off button
To prevent the switch trigger from being accidentally pulled, a
To start the tool, depress the
ASSEMBLY
CAUTION:
•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
Removing or installing planer blades
001603
Depth of cut may be adjusted by simply turning the knob on the front of the tool.
Switch action
CAUTION:
•Before plugging in the tool, always check to see
that the switch trigger actuates properly and returns
1
2
001605
CAUTION:
1.Socket wrench
2.Installation bolt
to the "OFF" position when released.
For tool without lock button and lock-off button
1. Switch trigger
1
004882
To start the tool, simply pull the switch trigger. Release the switch trigger to stop.
For tool with lock button
•Tighten the blade installation bolts carefully when attaching the blades to the tool. A loose installation bolt can be dangerous. Always check to see they are tightened securely.
•Handle the blades very carefully. Use gloves or rags to protect your fingers or hands when removing or installing the blades.
•Use only the Makita wrench provided to remove or install the blades. Failure to do so may result in overtightening or insufficient tightening of the
installation bolts. This could cause an injury.
To remove the blades on the drum, unscrew the installation bolts with the socket wrench. The drum cover comes off together with the blades.
To install the blades, first clean out all chips or foreign matter adhering to the drum or blades. Use blades of the
1
1.Lock button /
2.Switch trigger
same dimensions and weight, or drum oscillation/vibration will result, causing poor planing action and, eventually, tool breakdown.
2
004885
1
2
1.Bolt
2.Drum
3.Planer blade
4.Drum cover
5.Adjust plate
To start the tool, simply pull the switch trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then push in the lock button.
3
4
5
001606
5