Celestron VMH30SB-1, VMC30SB-1 manual Select the best Location, Indoor unit, Outdoor unit

Page 9

Installation

SelectthebestLocation

Indoor unit

1.Do not have any heat or steam near the unit.

2.Select a place where there are no obstacles in front of the unit.

3.Make sure that condensation drainage can be conveniently routed away.

4.Do not install near a doorway.

5.Ensure that the interval between a wall and the left (or right) of the unit is more than 10cm(3.9in). The unit should be installed as high as possible on the wall, allowing a minimum of 20cm(7.9in) from ceiling.

More than

10cm(3.9in)

More than

20cm(7.9in)

More than

10cm(3.9in)

More than

2.4m(7.9ft)

ENGLISH

6.Use a stud finder to locate studs to prevent unnecessary damage to the wall.

Outdoor unit

1.If an awning is built over the unit to prevent direct sunlight or rain exposure, make sure that heat radiation from the condenser is not restricted.

2.Ensure that the space around the back and sides is more than 30cm(11.8in). The front of the unit should have more than 70cm(27.6in) of space.

3.Do not place animals and plants in the path of the warm air.

4.Take the weight of the air conditioner into account and select a place where noise and vibration are minimum.

5.Select a place where the warm air and noise from the air conditioner do not disturb neighbors.

More than 60cm(23.6in)

More than

More than30cm(11.8in) 30cm(11.8in)

More than

More than

70cm(27.6in)

60cm(23.6in)

Installation Manual 9

Image 9
Contents Wall Mounted Inverter Mini-Split System Table of Contents No installation may cause a fire and electrical shock Be sure not to do Be sure to follow the instructionIt may cause injury or an accident Sharp edges may cause injury Otherwise, it may result in personal injuryOtherwise, it may cause a fire or electrical shock Otherwise, it may cause a fireOtherwise, it may disturb the neighbors Otherwise, it may cause water leakageOtherwise, it may cause vibration or water leakage Otherwise, it may do harm to your healthFeatures Symbols used in this ManualInstallation Parts Installation ToolsRead carefully, and then follow step by step Installation Map Select the best Location Indoor unitOutdoor unit Liquid Piping Length and ElevationDrill a Hole in the Wall Fixing Installation PlateCutting Tubes Flaring WorkBurrs removal Putting nut onConnecting the Piping CheckIndoor Wrap the insulation material around the connecting portion Indoor unit installationFor left rear piping Indoor unit installation Worst Practice Best PracticeKg .m Lb .ft OutdoorConnecting the Cables Wiring Diagram For strand wiring How to connect wiring to the terminalsPower supply cable Strand wire Connecting cableTo check the drainage Checking the DrainageDrain piping Pour a glass of water on the evaporatorForming the Piping Air purging Air PurgingAir purging with vacuum pump PreparationSoap water method EvacuationFinishing the job Test Running Prepare remote controllerSettlement of outdoor unit Evaluation of the performancePump Down Pump Down ProcedureSelecting the locationOutdoor Unit Installation guide at the seasideHeat CONTROLLER, INC

VMH30SB-1, VMC30SB-1 specifications

The Celestron VMC30SB-1 and VMH30SB-1 telescopes are exceptional instruments designed for both amateur astronomers and experienced stargazers alike. These models offer remarkable optical performance in compact packages, making them ideal for both home use and portable observations.

The VMC30SB-1 features a unique catadioptric design combining a primary mirror with a corrector lens, enabling significant improvements in image quality and sharpness. This design minimizes spherical aberration and allows for more precise focusing. With an aperture of 30 cm, it captures ample light for deep-sky observing while maintaining a manageable size for transport.

The telescope utilizes a Vixen-style dovetail mounting, which ensures compatibility with a variety of mounting systems. This flexibility allows users to easily switch between different mounts according to their preference or observing needs. The VMC30SB-1 is also equipped with a 2-inch dual-speed focuser, which provides smooth and precise focusing, enhancing the overall observing experience.

On the other hand, the VMH30SB-1 offers similar optical and mechanical features but integrates a specialized coating technology to enhance light transmission and reduce glare. This ensures that users can enjoy brighter and clearer images of celestial objects, making faint details more visible.

Both models come with a solid, stable optical tube that minimizes vibrations, ensuring steady views even at high magnification. They include a built-in finderscope that simplifies locating celestial objects, coupled with a user-friendly interface for easy operation.

Moreover, Celestron’s innovative StarSense technology is available for these telescopes, allowing for automatic alignment and facilitating a smooth observing experience. Users can set up quickly, even in challenging conditions, without the need for extensive setup procedures.

In conclusion, the Celestron VMC30SB-1 and VMH30SB-1 are robust telescopes that bring a blend of advanced technology, superior optics, and user-friendly features. Whether for detailed planetary observation or exploring deep-sky wonders, these telescopes are a remarkable choice for enthusiasts looking for quality and convenience in one reliable package. With their durable construction and outstanding performance, they stand out in the competitive astronomy market, offering experiences that inspire awe and curiosity about the universe.