3.Set the adjust platehet plate on the - gauge base so that the planer blade locating lugs on the set plate rest in the mini planer blade groove, then press in the heel of the adjust plate flush with the back side of the gauge base and tighten the pan head screws.
4.It is important that the blade sits flush with the inside flank of the gauge plate, the planer blade locating lugs sit in the blade groove and the heel of the adjust plate is flush with the back side of the gauge base. Check this alignment care- fully to ensure uniform cutting.
5.Slip the heel of the adjust plate into the groove of the drum.
Heel of
Inside flank of
6.Set the drum cover over the adjust platehet plate and screw in the three hex flange head bolts so that a gap exists between the drum and the set plate to slide the mini planer blade into position. The blade will be positioned by the planer blade locating lugs on the set plate.
7.The blade’s lengthwise adjustment will need to be manually positioned so that the blade ends are clear and equidistant from the housing on one side and the metal bracket on the other.
8.Tighten the three hex flange head bolts (with the socket wrench provided) and hand rotate the drum to check clear- ances between the blade ends and the tool body.
9.Check the three hex flange head bolts for final tightness.
10.Repeat procedures 1- 9 for other blade.
nMini | planer blade | ~ | D~~~ |
I | I | Groove |
|
6