Maintenance, Sharpening the planer blades

Adjust the edge fence until it comes in contact with the side of the workpiece, then secure it by tightening the screw.

1. V groove

010673

1.Screw

2.Edge fence

002587

MAINTENANCE

When planing, move the tool with the edge fence flush with the side of the workpiece. Otherwise uneven planing may result.

Maximum shiplapping (rabbeting) depth is 9 mm.

You may wish to add to the length of the fence by attaching an extra piece of wood. Convenient holes are provided in the fence for this purpose, and also for attaching an extension guide (optional accessory).

CAUTION:

•Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.

•Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.

Sharpening the planer blades

For standard blades only

Always keep your blades sharp for the best performance possible. Use the sharpening holder to remove nicks and produce a fine edge.

002584

002588

1.Sharpening holder

010183

Chamfering

To make a chamfering cut as shown in the figure, align the "V" groove in the front base with the edge of the workpiece and plane it.

003634

First, loosen the two wing nuts on the holder and insert the blades (A) and (B), so that they contact the sides (C) and (D). Then tighten the wing nuts.

				1. Wing nut
1				2.	Blade (A)
				3.	Blade (B)
				4.	Side (D)
	2		5	5.	Side (C)
			5

		3	4
		3
002589

Immerse the dressing stone in water for 2 or 3 minutes before sharpening. Hold the holder so that the both blades contact the dressing stone for simultaneous sharpening at the same angle.

1902 specifications

The Makita 1902 is a highly versatile and reliable power tool that has gained popularity among professionals and DIY enthusiasts alike. This model stands out due to its robust design and a range of innovative features that enhance its performance in various applications.

One of the main features of the Makita 1902 is its powerful 10.0 AMP motor, which delivers a no-load speed of up to 5,500 RPM. This high-speed capability allows the tool to handle a wide array of materials, from wood to metal, with precision and ease. The inclusion of a variable speed control further increases its versatility, enabling users to adjust the speed according to the specific task at hand.

Another noteworthy characteristic of the Makita 1902 is its lightweight design, weighing just around 6.2 pounds. This ergonomic construction not only makes the tool easy to handle but also reduces user fatigue during extended periods of use. The comfort grip handle enhances control and stability, ensuring that users can work efficiently without compromising safety.

The Makita 1902 is equipped with a built-in dust blower that helps keep the work surface clean and free of debris. This feature is particularly beneficial when working on projects that generate a lot of dust, such as woodworking or drywall cutting. By maintaining a clear line of sight, the dust blower allows for more accurate and precise cuts.

In addition to its practical features, the Makita 1902 employs advanced technologies that improve its overall performance. The tool incorporates a unique motor protection system to prevent overheating and extend its lifespan. This is crucial for high-demand tasks, as it ensures reliable operation throughout the duration of heavy use.

Furthermore, the Makita 1902 features a durable construction with high-quality materials, ensuring it can withstand demanding job site conditions. The tool's robust housing is designed to resist wear and tear, significantly enhancing its longevity.

In conclusion, the Makita 1902 is a standout power tool that combines power, speed, and user-friendly features, making it an ideal choice for a variety of applications. Whether for professional use or home improvement projects, the Makita 1902 delivers impressive results and reliability, making it a valuable addition to any tool collection.