3Com 3CRWE73796B manual Troubleshooting, Removing the Card

Page 12

7CHAPTER 2: SOFTWARE INSTALLATION

Removing Card Open Control Panel/System/Device Manager. Select the AirConnect WLAN NIC Software card components and click Remove.

Using the Device Manager to remove the card will uninstall the driver files.

Removing the Card

CAUTION: Exit any networking applications before removing the card.

When removing the PC Card, use the release lever or button on your card slot to release the card. When pulling out the card, do not pull on the antenna. Refer to “Removing the PC Card” on page 21.

Troubleshooting

Symptom

Solution

 

 

Weak signal or intermittent

Try reorienting the antenna. The PC Card antenna is

connection.

attached to the end of the card. For best use of the

 

antenna:

 

Keep the area around the antenna clear from

 

materials that could block radio transmission, such as

 

metal objects, electronic devices, and cordless

 

telephones.

 

If your signal is weak, change the direction of the

 

antenna slightly.

 

If necessary, move your computer a few inches to find

 

a better signal. Depending on your environment, a

 

difference of one or two inches can mean the

 

difference between a strong and a weak signal. See

 

“Status” on page 14 for details.

 

Use the Signal Strength display in the AirConnect Status

 

application to determine the best location and orientation

 

for a network connection. See “Connection” on page 15

 

for information on monitoring your AirConnect

 

connection.

 

 

Windows does not recognize the

Verify that PCMCIA support is installed.

adapter when installed.

Check whether the computer has a Plug and Play BIOS.

 

 

Check whether an AirConnect adapter is already in use.

 

 

Driver fails to load.

A resource conflict could exist. Use the Device Manager to

 

resolve resource conflicts. Select System from the Control

 

Panel, then click on the Device Manager tab.

 

 

Workstation cannot attach to the

Verify that the adapter Wireless LAN Service Area ID

network.

matches the access point ID. See “Easy Setup” on

 

page 13

 

Verify that the adapter Data Rate is configured properly

 

for the access point.

 

 

Network drive mappings disappear

Windows 98 will not restore NetWare network drive

when the notebook suspends or

mappings under these conditions. Log out and log in

the adapter is removed then

again, or restart the machine to restore the connections.

reinserted.

 

 

 

Nonfunctioning PC adapter LED.

Verify that the Wireless LAN Service Area ID matches the

 

access point ID.

 

 

Image 12
Contents AirConnect Mbps Wireless LAN PC Card User Guide United States Government Legend Contents Installing the PC Card Index Warranty and Regulatory Compliance Features Before YOU BeginIntroduction Installation Overview Disk Factory DriversAirConnect Application Disk Select Create DiskettesSoftware Installation Installation NotesWindows Software Installation Installing the Card Software InstallingUninstalling the Card DocumentationTroubleshooting Removing the CardInstalling Windows NT Drivers Before InstallingCurrent Service Pack DriverSetup With Networking InstalledSetup with No ConfiguringClick Advanced Installation for Windows CE Or notebook PC from which you will transfer filesTransferring AirConnect Files to Your Mobile Device Installation Procedure Easy Setup Wireless PC cardUtilities Status Software CONFIGURATION, TOOLS, and Utilities Status Encryption EncryptionConfiguration RequirementsWindows 95, Windows 98, Windows Me Windows NTOpen the 3Com AirConnect Settings screen Open the 3Com AirConnect Connector Monitor screenAd Hoc Operation For Operating Mode, select Ibss 802.11 Ad HocInstalling the PC Card Installing the PC CardInstalling the PC Card Upgrade Procedures Windows 95B OSR Wireless Client Upgrade ProcedureWindows Me Windows 98, Windows 98SE Wireless Client Select Install Wlan ApplicationsUpgrade Procedure Go to Start RunWindows NT Workstation/Server Wireless Client Log on as AdministratorControl Panel, select Network Close the Network windowWindows Professional Wireless Client Upgrade Systems Properties window, click HardwareHardware window, click the Device Manager button AppearsWindows 2000 Professional Wireless Client Upgrade Procedure Services Technical SupportOnline Technical Support from YourNorth America Country Telephone Number Fax Number Index NumbersIndex 3Com Corporation Limited Warranty 3Com AirConnect 11 Mbps Wireless LAN PC CardFor the replacement product, at list price Regulatory Compliance Information3Com End User Software License Agreement CE Marking and European Union Compliance

3CRWE73796B specifications

The 3Com 3CRWE73796B is a versatile wireless access point designed to enhance networking capabilities with robust features tailored for both home and small office environments. This access point supports the evolving needs of modern networks, providing reliable connectivity for a wide range of devices.

One of the standout features of the 3CRWE73796B is its adherence to the IEEE 802.11g wireless standard, ensuring compatibility with a broad spectrum of wireless devices, including laptops, smartphones, and tablets. Operating on the 2.4 GHz frequency band, this access point delivers impressive data rates of up to 54 Mbps, enabling users to enjoy seamless internet access and smooth multimedia streaming.

The 3CRWE73796B incorporates advanced security features to safeguard network connections. With support for WEP, WPA, and WPA2 encryption protocols, it offers multiple layers of security to protect sensitive data from unauthorized access. This focus on security is crucial in today’s digital landscape, where cyber threats are increasingly sophisticated.

Equipped with a user-friendly web-based interface, configuring the 3CRWE73796B is straightforward, making it accessible even for those with minimal technical expertise. The device allows for easy setup of various networking features, including SSID broadcasting, wireless channel selection, and MAC address filtering.

Moreover, the access point supports multiple SSIDs, enabling the creation of distinct networks for different user groups. This functionality is particularly beneficial in small office environments where guest access or departmental networking is required, allowing for better organization and security.

Another notable characteristic of the 3CRWE73796B is its support for Power over Ethernet (PoE) technology. This allows the device to be powered through the Ethernet cable, eliminating the need for additional power sources and simplifying installation, particularly in locations where access to a power outlet is limited.

In terms of physical design, the 3CRWE73796B features a compact and streamlined form factor that facilitates easy mounting on walls or ceilings. This design not only saves space but also helps optimize wireless coverage by positioning the device in ideal locations.

Overall, the 3Com 3CRWE73796B is a reliable wireless access point that combines ease of use, robust security features, and excellent performance. It serves as an effective solution for enhancing connectivity in various environments, making it a valuable addition to any network setup.