Introduction
Included items
1 Engraver PGG 15 A1
1 Engraving stencil
1 Operating instructions
Technical details
Rated voltage: | 230 V~ 50 Hz |
Mode of operation: | intermittent operation: S3 20% |
Rated current: | 0.15 A S3 20 % |
Stroke rate: | 6000 |
Noise and vibration data:
Measured values for noise are determined in accordance with
EN 60745. The
are typically: |
|
Sound pressure level: | 74.4 dB(A) |
Sound power level: | 85.4 dB(A) |
Uncertainty K: | 3 dB |
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration: 1.582 m / s2
Uncertainty K = 1.5 m / s2
WARNING! The vibration level given in these instructions has been measured in accordance with a standardised measurement pro- cedure specified in EN 60745 and can be used to compare devices.
8 GB/IE