Support handle
Place the support handle at your favorite position and tighten the han- dle securely.
Loosen Tighten
Depth gauge
Loosen the support handle and adjust the depth gauge at your favorite depth.
After adjusting, tighten the support handle and fix depth gauge.
Depth gauge
Depth of drilling
Battery pack
For Appropriate use of Ni-MH Battery Pack EY9210
Charge the
The ambient temperature range is between 0°C (32°F) and 40°C (104°F).
If the battery pack is used when the battery temperature is below 0°C (32°F), the tool may fail to function properly. In that case, charge the battery until charging is completed for appropriate functioning of the battery.
Battery pack life
The rechargeable batteries have a limited life. If operation time becomes extremely short after recharging, replace the battery pack with a new one.
Note: Use under extremely hot or cold conditions will reduce operating capacity per charge.
Release lever
Battery pack Installation and Removal
Pull the release lever to free the bat- tery holder.
Battery holder
Release lever
Fit the battery holder unit it clicks in position.
Battery charger (EY0214)
Note: Charge a new battery pack, or a battery pack that has not been used for a prolonged time, for about 24 hours to bring the battery up to full charge.
1.Plug the charger into an AC outlet.
2.Insert the battery pack firmly into the charger.
To AC outlet
Battery | Battery |
pack | charger |
- 8 -