Specifications, Symbols, Intended use | Makita HR5000K specification

ENGLISH (Original instructions)

SPECIFICATIONS

	Model		HR5000	HR5000K
	Carbide-tipped bit		50 mm	50 mm
Capacities	Core bit	Concrete	150 mm	150 mm
	Core bit	Hume pipe	255 mm	255 mm
		Hume pipe	255 mm	255 mm
	No load speed (min-1)		260	260
	Blows per minute		2,100	2,100
	Overall length		476 mm	503 mm
	Net weight		9.9 kg	10.2 kg
	Safety class			II

•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

•Specifications may differ from country to country.

•Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and

electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to

an environmentally compatible recycling facility.

ENE044-1

Intended use

The tool is intended for hammer drilling in brick, concrete and stone as well as for chiselling work.

ENF002-1

Power supply

The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire.

GEA005-3

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep children and bystanders away while

operating a power tool. Distractions can cause you to lose control.

Electrical safety

4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

HR5000K, HR500 specifications

The Makita HR500 and HR5000K are powerful rotary hammers designed for heavy-duty applications in construction and masonry work. Both models cater to professionals seeking robustness, efficiency, and precision in their tasks.

One of the standout features of these rotary hammers is their impressive motor power. The HR500 is equipped with a 10 Amp motor, while the HR5000K boasts a slightly more powerful 11 Amp motor, delivering high performance in drilling and chiseling operations. This ensures that both tools can tackle tough materials like concrete, brick, and stone with ease.

A notable technology incorporated in these models is the Active Vibration Control system. This innovation significantly reduces the amount of vibration experienced during operation, which not only enhances user comfort but also reduces fatigue during long working hours. The result is an improved overall experience, allowing users to maintain higher productivity levels throughout their tasks.

The HR500 and HR5000K feature a two-mode operation: rotary hammer mode and hammer-only mode. This versatility allows users to switch between different applications without the need for additional tools. The mechanical clutch protects the operator and the tool itself by disengaging the drive mechanism if the bit binds, preventing potential damage and ensuring safety.

Both models are designed with durability in mind. The housing is constructed from high-quality materials that can withstand the rigors of daily use on job sites. Additionally, these rotary hammers feature robust gears and components, ensuring a longer lifespan and dependable performance even under heavy loads.

In terms of user-friendliness, the HR500 and HR5000K come with ergonomic designs that promote comfortable handling. The soft grip handle helps absorb shock and provides better control, minimizing the risk of slippage during operation.

Lastly, the HR5000K model includes a depth gauge and a sturdy carrying case, making it an excellent choice for professionals who require precision and portability. The included accessories enhance the value of the tool, facilitating a smoother workflow.

In summary, the Makita HR500 and HR5000K rotary hammers offer exceptional power, innovative technology, and user-friendly features geared towards professional users. They stand out as reliable choices for anyone needing durable tools for demanding drilling and chiseling tasks.