Miller Electric 350 D manual Control Panel, Performance Data

Specifications (Subject to change without notice.)

Welding	Output		Weld Output Rated at			Max. Open-Circuit	Single-Phase Generator Power		Weight*
Mode	Range		104˚ F (40˚ C)			Voltage DC	Output Rated at 104˚ F (40˚ C)	Dimensions
CC/DC	20	– 350 A	300	A, 32	VDC, 100% Duty Cycle	80	12 kVA/KW, 120/240 VAC,	H: 30 in (762 mm)	Net: 998 lb
			350	A, 28	VDC, 60% Duty Cycle		100/50 A, 60 Hz	W: 24 in (610 mm)	(453 kg)
CV/DC	10	– 34 V				50
								D: 59-1/2 in (1511 mm)
CC/AC	35	– 250 A	200	A, 25	VAC, 60% Duty Cycle	70
CSA approved.							*Net weight with 2 gal of fuel. Add 40 lb for shipping weight.

Engine Specifications (Subject to change without notice.)

					Fuel	Oil	High Coolant Temp/
Engine Brand	Horsepower (HP)	Type	Weld Speed	Idle Speed	Capacity	Capacity	Low Oil Pressure Shutdown
Kubota DH905	26 at 3600 RPM	3-cylinder,	3600 RPM	2525 RPM	13 gal (49 L)	5.4 qt (5.1 L)	Standard
2-year limited		industrial,
North American		liquid-cooled
Manufacturer		diesel
Warranty

Control Panel

1.Voltmeter

2.Ammeter

3.Process/Contactor Switch

4.Voltage/Amperage Adjustment Control

5.Voltage/Amperage Adjust Switch and Remote 14 Receptacle

6.DC Polarity/AC Selector Switch

7.Fuel Gauge

8.Hour Meter

9.Engine Speed Switch

10.Glow Plug Switch

11.Engine Control Switch

12.120/240 V Receptacles Note: GFCIs are standard

1

2

3

4

5

6

7

8

9

10

11

12

Performance Data

FUEL CONSUMPTION DATA

•13-gallon fuel capacity.

•Welding at 150 A at 40% duty cycle, uses only

.61 gallon per hour — over 20 hours of operation.

7.57	2.00				FUEL CONSUMPTION
6.62	1.75					DC STICK/AUX POWER
5.67	1.50
						(HIGH SPEED)
4.73	1.25
3.78	1.00
2.84	0.75					DC STICK
1.98	0.50
					(LOW SPEED)
0.95	0.25		IDLE
0	0	0	50	100	150	200	250	300	350	400
LITERS/HR.	GAL/HR.U.S.
			POWER KVA AT 100% DUTY CYCLE
			DC POWER AMPS AT 100% DUTY CYCLE
		0	1	2	4	6	8	10	12

2