Bosch Power Tools 11317EVS manual Power Tool Safety Rules, Work Area

Page 2

BM 1619929511 3/03 3/10/03 12:09 PM Page 2

Power Tool Safety Rules

!WARNING Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep by-standers, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

Double Insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double

Insulation eliminates the need for the three wire grounded power cord and grounded power supply system. Before plugging in the tool, be certain the outlet voltage supplied is within the voltage marked on the nameplate. Do not use “AC only” rated tools with a DC power supply.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. If operating the power tool in damp locations is unavoidable, a Ground Fault Circuit Interrupter must be used to supply the power to your tool. Electrician’s rubber gloves and footwear will further enhance your personal safety.

Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W." These cords are rated for outdoor use and reduce the risk of electric shock. Refer to “Recommended sizes of Extension Cords” in the Accessory section of this manual.

Personal Safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Keep handles dry, clean and free from oil and grease.

Avoid accidental starting. Be sure switch is “OFF” before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch “ON” invites accidents.

Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

-2-

Image 2
Contents Importante Power Tool Safety Rules Work AreaDemolition Hammer Safety Rules ServiceBM 1619929511 3/03 3/10/03 1209 PM Symbols Functional Description and Specifications Demolition HammerSlide ON-OFF Switch Operating InstructionsMaintenance AccessoriesSécurité électrique Règles de Sécurité GénéralesAire de travail Sécurité des personnesConsignes de sécurité pour le marteau de démolition RéparationLe plomb provenant des peintures à base de plomb Symboles Description fonctionnelle et spécifications Marteau de démolitionConsignes de fonctionnement Entretien MaintenanceAccessoires NettoyageConserve Estas Instrucciones Normas de seguridad para herramientas mecánicasArea de trabajo Normas de seguridad para martillos de demolición ServicioBM 1619929511 3/03 3/10/03 1209 PM Símbolos De Ni-CdDescripción funcional y especificaciones Martillo de demoliciónInstrucciones de funcionamiento Limpieza MantenimientoAccesorios BM 1619929511 3/03 3/10/03 1209 PM Limited Warranty of Bosch Portable and Benchtop Power Tools

11317EVS specifications

The Bosch Power Tools 11317EVS is a versatile and powerful tool that has become a staple for both professionals and DIY enthusiasts. This tool is designed to deliver unmatched performance, durability, and precision for various applications, making it an excellent choice for construction, renovation, and woodworking projects.

One of the standout features of the 11317EVS is its robust motor. The tool is equipped with a 12-amp motor capable of delivering up to 2,500 RPM, ensuring efficient operation regardless of the task at hand. This powerful motor provides the torque necessary for heavy-duty applications, such as drilling through thick materials or driving screws into dense wood.

The 11317EVS incorporates a variable speed control feature that allows users to adjust the speed according to the material being worked on. This is particularly useful for delicate tasks requiring precision, as users can easily fine-tune the tool's speed to prevent damage or splintering. The electronic speed control is an essential technology that enhances versatility, enabling the tool to adapt to different materials and tasks seamlessly.

Another noteworthy characteristic of the 11317EVS is its ergonomic design. The tool features a soft-grip handle that provides maximum comfort during prolonged use, reducing fatigue and ensuring greater control. The tool's lightweight construction further contributes to its user-friendliness, making it easy to maneuver in tight spaces or overhead applications.

The Bosch Power Tools 11317EVS also boasts a durable construction that ensures longevity and reliability. The robust housing protects the internal components from damage, while the dust guard helps prevent dust and debris from entering the motor, which can significantly extend the tool's lifespan.

Additionally, the quick-change chuck system allows for rapid and easy bit changes, minimizing downtime and increasing productivity on the job site. This feature is particularly advantageous for users who frequently switch between tasks, as it streamlines the workflow and keeps projects moving efficiently.

In summary, the Bosch Power Tools 11317EVS is a powerful, versatile, and durable tool that meets the needs of a wide range of users. Its high-performance motor, variable speed control, ergonomic design, and robust construction make it an ideal choice for both professional contractors and weekend warriors. Whether you're tackling heavy-duty projects or intricate tasks, the 11317EVS is designed to deliver exceptional results, making it a reliable addition to any toolbox.