Chicago Electric 69276 owner manual Troubleshooting, Problem Possible Causes Likely Solutions

Page 12

yt feSa

etupS

no atierOp

ce enan Maint

Troubleshooting

Problem

 

Possible Causes

 

Likely Solutions

Tool will not start.

1.

Cord not connected.

1.

Check that cord is plugged in.

 

2.

No power at outlet.

2.

Check power at outlet. If outlet is unpowered,

 

 

 

 

turn off tool and check circuit breaker. If breaker

 

 

 

 

is tripped, make sure circuit is right capacity

 

 

 

 

for tool and circuit has no other loads.

 

3.

Tool’s thermal reset breaker

3.

Turn off tool and allow to cool.

 

 

tripped (if equipped).

 

Press reset button on tool.

 

4.

Internal damage or wear.

4.

Have technician service tool.

 

 

(Carbon brushes or

 

 

 

 

switch, for example.)

 

 

Tool operates slowly.

Extension cord too long or

Eliminate use of extension cord. If an extension

 

cord diameter too small.

cord is needed, use one with the proper diameter

 

 

 

for its length and load. See Extension Cords

 

 

 

in Grounding section on page 6.

Performance

1.

Accessory dull or damaged.

1.

Keep cutting accessories sharp. Replace as needed.

decreases over time.

2.

Carbon brushes worn

2.

Have qualified technician replace brushes.

 

 

or damaged.

 

 

Excessive noise

Internal damage or wear. (Carbon

Have technician service tool.

or rattling.

brushes or bearings, for example.)

 

 

Overheating.

1.

Forcing tool to work too fast.

1.

Allow tool to work at its own rate.

 

2.

Accessory misaligned.

2.

Check and correct accessory alignment.

 

3.

Accessory dull or damaged.

3.

Keep cutting accessories sharp. Replace as needed.

 

4.

Wear ANSI-approved safety goggles and

 

4.

Blocked motor housing vents.

 

NIOSH‑approved dust mask/respirator while

 

 

 

 

blowing dust out of motor using compressed air.

 

 

 

5.

Eliminate use of extension cord. If an extension

 

5.

Motor being strained by long or

 

cord is needed, use one with the proper diameter

 

 

small diameter extension cord.

 

for its length and load. See Extension Cords

 

 

 

 

in Grounding section on page 6.

Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.

Page 12

For technical questions, please call 1-800-444-3353.

Item 69276

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Email our technical support at tech@harborfreight.com Table of Contents General Power Tool Safety WarningsWork area safety Electrical safety Personal safetySafety Setup Operation Maintenance Power tool use and care ServiceRotary Hammer Safety Warnings Yt feSa EtupSVibration Safety SafetyOperation Maintenance This tool vibrates during useGrounded Tools Tools with Three Prong Plugs Double Insulated Tools Tools with Two Prong PlugsGrounding Symbology Safety SetupExtension Cords Specifications Setup Before UseFunctions Yt feSa EtupS No atierOp Ce enan MaintTool Set Up Using the Depth GaugeAdjusting the Functions Operating InstructionsWork Piece and Work Area Set Up General Operating InstructionsYt feSa No atierOp Ce enan MaintCleaning, Maintenance, and Lubrication Maintenance and ServicingOnly by a qualified service technician Troubleshooting Problem Possible Causes Likely SolutionsPlease Read the Following Carefully Parts List Parts List and DiagramYt fe EtupS No atierOp Ce enan MaintAssembly Diagram Limited 90 Day Warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69276 specifications

The Chicago Electric 69276 is a versatile and powerful tool that has become a favorite among both DIY enthusiasts and professional woodworkers. This table saw is designed to offer precision, stability, and durability, making it an essential addition to any workshop. Its robust construction is complemented by advanced features that enhance usability and safety, ensuring a reliable performance in various cutting applications.

One of the standout aspects of the Chicago Electric 69276 is its impressive motor. Equipped with a 15-amp motor, this table saw delivers exceptional cutting power, allowing users to tackle a wide range of materials, from softwoods to hardwoods. The motor operates at a high speed, enabling a smooth and efficient cutting experience. Coupled with a 10-inch blade, the table saw can handle rip cuts, cross cuts, and bevel cuts with ease.

The design of the Chicago Electric 69276 emphasizes user comfort and convenience. The table has a large surface area, which provides ample space for handling larger workpieces. The extended table wings further enhance support, ensuring stability during operation. Additionally, the fence system is both sturdy and accurate, allowing for precise measurements and cuts. It includes a quick-release feature, making adjustments and alignment straightforward.

Another notable innovation in the Chicago Electric 69276 is its built-in safety features. The saw is equipped with a blade guard and riving knife, helping to prevent kickback and ensuring a safer cutting environment. Furthermore, the push stick included in the package allows users to maintain a safe distance from the blade while maneuvering smaller pieces.

Mobility is also a key characteristic of the Chicago Electric 69276. While it is a powerful stationary tool, it has been designed with portability in mind. With a compact footprint, it can be easily transported to different job sites or stored away when not in use. The durable wheels and collapsible stand make it effortless to move around.

In conclusion, the Chicago Electric 69276 is a powerful, versatile, and safe table saw that meets the demands of both hobbyists and professionals. With its impressive motor, large cutting capacity, and enhanced safety features, it stands as a reliable option for anyone looking to achieve precise cuts and tackle ambitious woodworking projects. Whether used in a home garage or a professional workshop, this table saw is sure to deliver quality performance and long-lasting reliability.
Top Page Image Contents