Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool off and remove the Battery Pack before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
2.After Use, wipe external surfaces of the tool with clean cloth.
3.Periodically blow dust and grit out of the motor vents using dry compressed air.
Wear
4.A plastic storage case has been provided for safe storage of your Rotary Tool and its bits, parts and accessories. Always
store your tool and its accessories in the case provided.
5.Protect the tool and its parts and accessories from moisture and damp or corrosive atmospheres.
6.Protect this tool from damage. Do not leave it in a place where it can be banged around, such as a truck bed or vehicle trunk.
7.Some of the bits provided are “grinding bits” using stone abrasives. During use, these may clog up with removed material or lose their shape. To clean and reshape these bits, run them against the provided Dressing Stone. The Dressing Stone will abrade away the clogging materials and will reshape the Grinding Bits as appropriate.
8.NiCd Battery must be recycled or disposed of properly. Do not short, incinerate or open battery.
9.
WARNING! If the supply cord of the Transformer is damaged, it must be replaced only by a qualified service technician.
Accessory Storage and Handling
1.Handle accessories carefully to prevent dropping or bumping. Do not use wheels that have been dropped or bumped.
2.Store accessories in carrying case. Store in a dry area above freezing temperatures. Any grinding or
SKU 92880 | For technical questions, please call | Page 13 |