Chicago Electric 94882 operating instructions Symbology, Specific Safety Rules

SYMBOLOGY

Double Insulated

Canadian Standards

Association

Underwriters

Laboratories, Inc.

V~

A

Volts Alternating Current

Amperes

no xxxx/min.	No Load Revolutions
	per Minute (RPM)

SPECIFIC SAFETY RULES

1.Maintain labels and nameplates on the Breaker Hammer. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

2.Industrial applications must follow OSHA requirements.

3.Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately.

4.Always disconnect the Breaker Hammer from its electrical outlet before performing any services, maintenance, or cleaning such as leaving the work area, moving the tool from one location to another, changing Saw Blades, cleaning sawdust from the unit, etc.

5.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

(a)Lead from lead-based paints;

(b)Crystalline silica from bricks and cement or other masonry products;

(c)Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals; work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code 25249.5, et seq.)

SKU 94882 PAGE 8