Specifications
Electrical Requirements 120 V~ / 60 Hz
Rotation Speed | 16,000 RPM |
Collet Size | 3/32”, 1/32”, and two 1/8” |
Unpacking
When unpacking, check to make sure that the item is intact and undam- aged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
WARNING To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
3.There must not be hazardous objects, such as utility lines or foreign objects, nearby that will present a hazard while working.
Accessory Tips
•Mandrels are the shanks with a threaded or screw head. Use them with the
•The Mounted Stones are used for sharpening cutting tools, screw- drivers etc, deburring metal after cutting, and removing excess material on metal and ceramics.
•The Sanding Drums can be used to smooth out rough areas on soft materials.
•The
•The Buffing Wheels are used to polish materials.
•The Wire Wheels are used to clean dirty or rusted surfaces.
•The Whet Stone is used to sharpen the Drill Bits.
•The Drill Bits can be used to bore small holes.
4.Hold the Lock Button down and un- screw the Collar.
General Operating Instructions
1.Designate a work area that is clean and
2.Secure loose workpieces using a vise or clamps (not included) to prevent movement while working.
SKU 97626 | For technical questions, please call | Page 6 |