Global Machinery Company DEC004DC instruction manual Maintenance Cleaning, Repairs

3.Loosen the shaft by turning anti-clockwise (as indicated on the shaft). Extend the shaft to the desired height and lock it into place by turning the shaft clock-wise (fig. Q).

Q R

4.Use the wire loop (8) to hang the rotary tool when using the flexible shaft. (fig. R)

Maintenance

Store the machine, instruction manual and, where necessary, the accessories in the original packaging. In this way you will always have all the information and parts ready on hand.

Cleaning

1.Keep the tool’s air vents unclogged and clean at all times.

2.Remove dust and dirt regularly. Cleaning is best done with a rag.

3.Never use caustic agents to clean plastic parts.

CAUTION. Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp cloth is recommended. Water must never come into contact with the tool.

Repairs

1.Only an authorised service centre should replace the cordset or effect other repairs. If the cordset is damaged or worn, have it repaired or replaced by an authorised service centre.

2.When the brushes are worn, the tool may not work. Have new brushes fitted by an authorised service centre.

Please refer to your warranty card, which is separate to these instructions

15