Unpacking
When unpacking, check to make sure the following parts are included. Refer to the Parts List and Assembly Drawing located at the end of this manual. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Regulator (11)
|
|
|
|
|
|
|
|
|
|
|
|
|
| Air Hammer (10) |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Screw (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Anvil (5) |
|
|
|
|
|
|
|
|
|
|
|
| Hammer Head (3) | |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Adjustable Pole (7) |
|
|
|
|
|
|
|
|
|
|
|
| Air Hose (12) | |
|
|
|
|
|
|
|
|
|
|
|
| |||
Stopper Pin (9) |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| Range Adjust Block (6) | ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Mounting Holes (Qty. 4) |
|
|
|
|
|
|
|
|
| Switch Assembly (13) | ||||
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| ||||
Installation
Mounting “C” Frame
1.Select a workbench in the shop area able to support the weight of the Planishing Hammer, the metal being worked on, and the vibration of the planishing process.
2.Mount the “C” Frame (1) to the workbench using hardware (not supplied).
The “C” Frame should be positioned so that the mounted Air Hammer (10) is extended slightly over the edge of the workbench. This will accommodate various shapes of metals being planished. Hardware should consist of nuts, bolts, flat washers, and lock washers.
Note: There is an entry hole on the side of “C” Frame (1) where sand can be inserted to reduce noise and vibration.
Air Connection
1.Attach a Union fitting (not supplied) into the Switch Assembly Inlet (13) fitting.
A Union fitting is necessary before a connection can be made to an Air Compressor.
2.For easy connection or removal, attach an Air Coupler (not supplied) to the Union fitting, if
3.Retighten all couplings and fittings.
4.Attach the Air Hose (not supplied) from the Air Compressor (not supplied) to the
Switch Assembly (13). Place Switch Assy on the floor next to the Planishing Hammer.
SKU 94847 | For technical questions, please call | Page |