Hitachi DH 40MR manual Specifications, Standard Accessories

English

SPECIFICATIONS

Voltage (by areas)*	(110V, 115V, 120V, 127V, 220V, 230V, 240V)
Power input	950 W*
Capacity	Drill bit: 40 mm
	Core bit: 105 mm
No load speed	240 – 480/min
Full-load impact rate	1320 – 2650/min
Weight (without cord, side handle)	6.5 kg

* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES
(1)	Case (Molded plastic)	1
(2)	Side Handle	1
(3)	Stopper	1
(4)	Hexagon Bar Wrench (for 6 mm screw)	1
(5)	Hexagon Bar Wrench (for 5 mm screw)	1
(6)	Hexagon Bar Wrench (for 4 mm screw)	1
(7)	Hammer Grease A	1
Standard accessories are subject to change without
notice.

OPTIONAL ACCESSORIES (sold separately)

1.Through-hole drilling (Rotation + Hammering)

(1) Drill bit (SDS max shank)

Outer diameter (mm)	Overall length (mm)
16	340,	540
19
22	320,	520
25
28
32	370,	570
38
40

2.Anchor hole drilling (Rotation + Hammering) Drill bit (Taper shank)

(3)Cotter

(1) Drill bit (taper shank)	(2) Taper shank
External dia.: 11, 12.3, 12.7,	adapter
14.3, 14.5,	(SDS max shank)
17.5 mm

Taper shank		Application drill bit
adapter
Morse taper		Drill bit (taper shank)
(No. 1)		11, 12.3, 12.7, 14.3, 14.5, 17.5 mm
	Adapter for SDS-plus shank bit
	(1) Drill bit		(2) Adapter for SDS-plus
	(SDS-plus shank)		shank bit
			(SDS max shank)

3. Large dia. hole boring (Rotation + Striking)

(Guide	(1) Center	(2) Core	(3) Core bit
plate)	pin	bit	shank

(1) Center pin

⬤Applied to core bits from 38 mm to 105 mm

⬤Applied to core bits 32 mm and 35 mm

NOTE

Do not use core bits 25 mm or 29 mm.

(2) Core bit

⬤External dia. 25, 29, 32, 35, 38, 45, 54, 64, 79, 94, 105 mm (with guide plate, not applicable to cores 25 mm or 29 mm)

(3) Core bit shank

⬤Applied to core bits above 38 mm

⬤Applied to core bits below 35 mm

4.Drilling holes ...... For drilling metal and wooden materials

13 mm drill chuck	Chuck adapter
(13VLA)	(SDS max shank)

Chuck wrench

5