Chauvet 56C user manual Safety Instructions

Page 4

Safety Instructions

Please read these instructions carefully. It includes important information about the installation, usage and maintenance of this product.

Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.

Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.

This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to rain or moisture.

Make sure there are no flammable materials close to the unit while operating.

The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces. Be sure that no ventilation slots are blocked.

Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse source.

Secure fixture to fastening device using a safety chain.

Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures higher than this.

In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.

Never connect the device to a dimmer pack.

Make sure the power cord is never crimped or damaged.

Never disconnect the power cord by pulling or tugging on the cord.

Never carry the fixture directly from the cord. Always use the hanging/mounting bracket. Avoid direct eye exposure to the light source while it is on.

1. Before You Begin

4

4/19/2010 1:08 PM

Image 4
Contents Snapshot Table of Contents What is included Before YOU BeginUnpacking Instructions Manual ConventionsSafety Instructions Introduction FeaturesProduct Overview Setup AC PowerMounting OrientationConfiguring the Starting Address Accessing the 2 PersonalitiesOperating Instructions DMX OperationMaster/Slave Mode Sound-Active, Auto Mode, Static Colors Strobe SpeedStandalone Operation AutomaticCH Mode DMX Channel ValuesAppendix General MaintenanceDMX Primer Data Cabling Fixture LinkingPin to 5-Pin Conversion Chart Setting up a DMX Serial Data LinkGeneral Troubleshooting Setting the Starting AddressContact Us Returns Procedure ClaimsTechnical Specifications Power

56C specifications

The Chauvet 56C is an innovative and versatile LED wash light designed for professional lighting applications. This fixture is part of Chauvet’s extensive lineup, showcasing their commitment to quality, performance, and creative possibilities. The 56C is particularly distinguished by its vibrant color mixing capabilities, which make it an ideal choice for stage productions, concerts, theatrical presentations, and architectural lighting.

One of the standout features of the Chauvet 56C is its extremely efficient LED technology. With a power output of 56 watts, this fixture can deliver brilliant, saturated colors while consuming minimal energy. The 56C utilizes a combination of RGBW LEDs, which means it can produce a wide spectrum of colors, including pure whites, rich reds, deep blues, and vivid greens. This color mixing capability allows lighting designers to create dynamic effects and dramatic atmospheres suitable for various applications.

The Chauvet 56C is also equipped with advanced controls, giving users flexibility in how they operate the fixture. It can be controlled via DMX, allowing for precise adjustments to intensity, color, and effects. Additionally, the fixture can run in stand-alone mode or be set to sound activation, making it easy to integrate into any lighting setup without the need for a complex control system.

Another notable feature is the built-in effects. The 56C comes with a variety of pre-programmed color sequences and chase patterns that can be easily accessed, providing lighting designers with instant visual interest. The fixture's seamless RGBW color mixing contributes to smooth fades and transitions, enhancing the overall aesthetic of any production.

Durability is another strong point of the Chauvet 56C. Constructed with high-quality materials, it is designed to withstand the rigors of regular use in diverse environments. The 56C remains cool during operation, reducing the risk of overheating and extending the life of the LEDs.

In conclusion, the Chauvet 56C is a versatile, efficient, and robust lighting solution that brings creativity and reliability to a variety of lighting scenarios. Its combination of advanced LED technology, extensive color mixing options, and user-friendly controls makes it a preferred choice for lighting professionals seeking to elevate their projects with stunning visual effects.