Chauvet Aw 7x7 manual AC Plug, Replacing, Fuse, Connection, Wire U.S Wire Europe Screw Color

EN NEXUS™ Aw 7x7 QRG

AC Power This product has an auto-ranging power supply that can work with an input voltage range of 100~240 VAC, 50/60 Hz.

Power Linking You can link up to 7 NEXUS™ Aw 7x7 products at 120 V, 12 products at 208 V, or 13 products at 230 V. Never exceed this number. Power linking cords can be purchased separately.

Power Linking

Diagram

AC Plug	Connection		Wire (U.S.)	Wire (Europe)	Screw Color
	AC Live		Black	Brown	Yellow/Brass
	AC Neutral		White	Blue	Silver
	AC Ground		Green/Yellow	Green/Yellow	Green
Replacing the	1.	Disconnect this product from power.
Fuse	2.	Using a flat-head screwdriver, unscrew the fuse holder cap from
		the housing.
	3.	Remove blown fuse and replace with a good fuse of the same type
		and rating.
	4.	Screw the fuse holder cap back in place and reconnect power.

DMX Linking The NEXUS™ Aw 7x7 will work with a DMX controller using a regular DMX serial connection. A DMX Primer is available from www.chauvetpro.com.

DMX Connection The NEXUS™ Aw 7x7 uses a regular DMX data for its DMX personalities: 5, 49, and 54. See the User Manual to connect and configure for DMX operation.

Master/Slave The NEXUS™ Aw 7x7 uses the DMX data connection for its Master/Slave Connection mode. See the User Manual to connect and configure for Master/Slave

operation.

3