4.OPERATING INSTRUCTIONS
Using the Control Panel
Access control panel functions using the four buttons located directly underneath the LED display on the included wired remote.
BUTTONFUNCTION
<MODE
ESC>
<DOWN>
<UP>
<ENTER>
Used to scroll through the current operating mode, as well as back out of the current menu option
Used to select decreasing advancement in the value
Used to select increasing advancement in the value
Used to select a value and store it to memory
Use the control panel to select the operating mode, as well as the
Menu Map
Menu |
| Programming Steps | Description | ||||
DMX Mode | d001 |
| d001~512 | DMX starting address |
| ||
|
|
|
| NASL |
|
| |
Standalone Mode | NASL |
| SLAu |
| SoN | Standalone: Slave receive mode |
|
| NStS |
| SrUn | Standalone: Slow | |||
|
|
|
| ||||
|
|
| NAFA |
| FASt | Standalone: |
|
Pan Invert | PAN |
|
| rPAN | Pan invert | ||
|
|
|
|
|
|
| |
Tilt Invert | tit |
|
| rtit | Tilt invert | ||
|
|
|
|
|
|
| |
Display Invert | diS |
|
| rdiS | Invert the display | ||
|
|
|
|
|
|
| |
DMX Personality | 11CH |
|
| 8CH | |||
|
| 11CH | |||||
|
|
|
| ||||
Reset |
|
| rESt |
|
| Reset all motors to correct any errors with |
|
|
|
|
| motors misaligning during operation | |||
|
|
|
|
|
| ||
Load Default |
|
| LoAd |
|
| Revert all settings back to the factory |
|
|
|
|
| default |
| ||
|
|
|
|
|
| ||
Configuring the Starting Address
The Intimidator™ Scan LED 300 fixture uses up to 11 DMX channels. In this DMX configuration/personality, the highest channel that the fixture may be set to in order to function properly is 502. Any address higher than this will prevent access to all of the channels, while in this mode; however, if you desire to use one of the other DMX channels configurations (personalities), please consider the total DMX channels when selecting a DMX address.
The Intimidator™ Scan LED 300 fixture uses 8 or 11 DMX channels, depending on the selected DMX configuration (personality).
Page 9 of 17 | Intimidator Scan LED 300 User Manual (Rev. 3) |