Chauvet 86B user manual Setting the Starting Address, General Troubleshooting, Contact Us

Page 15

Setting the Starting Address

This DMX mode enables the use of a universal DMX controller device. Each fixture requires a start address from 1~512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start address. For example, a fixture that uses six DMX channels and was addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, and 105. Choose start addresses so that the channels used do not overlap, and note the start address selected for future reference.

If this is your first time addressing a fixture using the DMX control protocol, we suggest jumping to the “Appendix” section and reading the heading “DMX Primer”. It contains very useful information that will help you understand its use.

General Troubleshooting

SYMPTOM

POSSIBLE CAUSE(S)

POSSIBLE ACTION(S)

 

 

 

Breaker/Fuse

Excessive circuit load

Check total load placed on the electrical circuit.

Short circuit along the power

Check for a short in the electrical wiring (internal and/or

keeps blowing

 

wires

external)

 

 

 

Device does not

power up

No power Loose power cord

Check for power on power outlet Check power cord

 

Wrong DMX addressing

Check Control Panel and unit addressing

 

Damaged DMX cables

Check DMX cables

Fixture is not

Wrong polarity settings on the

Check polarity switch settings on the controller

controller

responding to

 

 

 

DMX

Loose DMX cables

Check cable connections

 

 

Faulty DMX interface

Replace DMX input

 

Faulty Main PCB

Replace Main PCB

 

 

 

 

Non DMX cables

Use only DMX compatible cables

 

Bouncing signals

Install terminator as suggested

Loss of signal

Long cable / Low level signal

Install amplifier right after fixture with strong signal

 

 

 

Too many fixtures

Install an optically coupled DMX splitter after unit #32

 

Interference from AC wires

Keep DMX cables separated from power cables or

 

 

black lights

 

 

 

If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support.

Contact Us

World W ide

General Information

CHAUVET

 

3000 North 29th Court

 

Hollywood, FL 33020

 

voice:

954.929.1115

 

fax:

954.929.5560

 

toll free: 800.762.1084

Technical Support

CHAUVET

 

3000 North 29th Court

 

Hollywood, FL 33020

 

voice:

954.929.1115 (Press 4)

 

fax:

954.929.5560 (Attention: Service)

World Wide Web

www.chauvetlighting.com

5. Appendix

15

1/4/2010 11:37 AM

Image 15
Contents Snapshot Table of Contents Manual Conventions What is includedBefore YOU Begin Unpacking InstructionsSafety Instructions Features IntroductionProduct Overview AC Power SetupOrientation MountingDMX Operation Configuring the Starting AddressAccessing the 2 Personalities Operating InstructionsStrobe Speed Master/Slave Mode Sound-Active, Auto Mode, Static ColorsAutomatic Standalone OperationDMX Channel Values CH ModeGeneral Maintenance AppendixDMX Primer Fixture Linking Data CablingSetting up a DMX Serial Data Link Pin to 5-Pin Conversion ChartSetting the Starting Address General TroubleshootingContact Us Claims Returns ProcedurePower Technical Specifications

86B specifications

The Chauvet 86B is a striking LED fixture that has gained recognition for its versatility and robust performance in various lighting applications. This powerful fixture is particularly favored in the world of event lighting, theatrical productions, and architectural illumination due to its exceptional features and innovative technologies.

One of the standout characteristics of the Chauvet 86B is its state-of-the-art RGBW color mixing system. This allows for a vibrant and expansive palette of colors, ensuring that lighting designers can achieve an endless variety of hues and shades. The fixture is equipped with multiple DMX control channels, offering users precise control over lighting effects and color transitions, allowing for intricate programming suitable for complex performances.

The Chauvet 86B also boasts powerful output through its high-quality LEDs. This results in bright, impactful washes that can easily fill a space with color and light. The fixture is designed with an advanced optical system, enabling smooth, even distribution of light, which is essential for creating the desired ambiance in any setup.

In terms of build quality, the Chauvet 86B is engineered for durability. Its compact and rugged design ensures that it can withstand the rigors of touring and on-location use, making it a reliable choice for professionals. Additionally, the fixture features an integrated safety bracket and multiple mounting options, offering flexibility in how it is positioned and used in various environments.

Another notable feature of the Chauvet 86B is its user-friendly interface. The onboard control panel simplifies the operation, allowing users to easily navigate settings and adjustments without needing advanced technical skills. This accessibility is further enhanced by its ability to store multiple user-defined programs, ensuring that operators can quickly recall their favorite settings and execute stunning light shows with minimal effort.

One can also appreciate the fixture's energy efficiency. The LED technology incorporated in the Chauvet 86B not only reduces power consumption but also minimizes heat output, making it a safer choice for prolonged use in enclosed spaces.

Overall, the Chauvet 86B stands out as a versatile and powerful tool for lighting professionals. With its advanced color mixing, robust build quality, and user-friendly design, it is an excellent addition to any lighting rig for events, performances, or installations. Whether enhancing the mood at a wedding, setting the scene for a theatrical production, or illuminating architectural structures, the Chauvet 86B delivers impressive results that are sure to captivate audiences.