Chauvet 2 user manual Setup, AC Power Fuse Replacement

Page 7

3.SETUP

AC Power

Fuse

Replacement

The Cubix™ 2.0 has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.

Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Disconnect the product from the power outlet before replacing the fuse.

1.Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

2.Pry the fuse holder out of the housing.

3.Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

4.Insert the fuse holder back in place and reconnect power.

Installed fuse

(held by plastic clip)

Safety cap

Spare fuse holder (inside safety cap)

Power Linking The product provides power linking via the Edison outlet located in the back of the unit. Please see the diagram below for further explanation.

Power Linking

Diagram

 

2nd Product

 

 

3rd Product

1st Product

 

 

 

 

Other products

You can power link up to 19 Cubix™ 2.0 units on 120 VAC or up to 32 Cubix™ 2.0 units on 230 VAC.

The power linking diagram corresponds to the North American version of the product ONLY! If using the product in other markets, you must consult with the local CHAUVET® distributor as power linking connectors and requirements may differ in your country or region.

Cubix™ 2.0 User Manual (Rev. 5)

Page 7 of 13

Image 7
Contents Page Table of Contents Text What Is Included Unpacking InstructionsSymbols Before YOU BeginDMX Product at a GlanceProduct Overview IntroductionProduct Dimensions AC Power Fuse Replacement SetupOrientation MountingRigging Menu Map ConfigurationOperation Control Panel OperationDMX Channel Assignments and Values Configuration StandaloneAutomatic Mode Sound-Active Mode Channel Function Value SettingSlave units MaintenanceProduct Maintenance Master/Slave ModeTechnical Specifications Technical Support Returns Contact UsWorld Headquarters United Kingdom & Ireland General Information
Related manuals
Manual 18 pages 58.62 Kb Manual 36 pages 30.83 Kb

2 specifications

The Chauvet 2 is a sophisticated lighting fixture that has gained popularity within the entertainment and stage lighting industry. Known for its versatility and advanced features, the Chauvet 2 series includes various models that cater to different lighting needs, making it a frequent choice for concert tours, theatrical productions, and corporate events.

One of the main features of the Chauvet 2 is its robust LED technology. With energy-efficient LED lights, these fixtures provide vibrant colors and impressive brightness while consuming significantly less power than traditional lighting solutions. The fixtures are designed with high-output LEDs that ensure an impactful lighting experience, even in large venues.

Chauvet 2 fixtures often come equipped with a wide range of color-mixing capabilities. Many models utilize RGB color mixing, allowing users to create millions of distinct color combinations. This characteristic is essential for lighting designers looking to enhance their productions with dynamic and visually appealing effects. Some fixtures even incorporate additional features like UV LEDs for creating unique textures and effects.

Another important aspect of the Chauvet 2 series is its user-friendly control options. Many models support DMX control, permitting precise adjustments and programming of lighting effects. Additionally, some fixtures feature built-in shows and automated programming modes, which provide flexibility for users who may not have extensive experience in lighting design.

Durability is also a key characteristic of the Chauvet 2 range. Built with high-quality materials that ensure longevity, these fixtures are designed to withstand the rigors of touring and heavy use in professional environments. Features such as rugged housing and efficient thermal management systems help to ensure reliable performance over time.

Portability is crucial for many lighting professionals, and the Chauvet 2 series excels in this area. Compact and lightweight designs allow for easy transport and installation, making the fixtures suitable for a range of setups, from small venues to large stages. The inclusion of various mounting options enhances flexibility and ease of use.

In summary, the Chauvet 2 series stands out for its LED technology, vibrant color mixing, user-friendly controls, durability, and portability. These features make it an exceptional choice for lighting professionals seeking to deliver high-quality visual experiences in diverse performance settings.