Chauvet 15090394 user manual Safety Notes, Product at a Glance

Page 4

Product at a Glance

Use on Dimmer

Outdoor Use

Sound Activated

DMX

Master/Slave

Auto Programs

Auto-ranging Power Supply

Replaceable Fuse

User Serviceable

Duty Cycle

Safety Notes

Please read the following Safety Notes carefully before working with this product. They include important safety information about its installation, usage, and maintenance.

Always connect this product to a grounded circuit to avoid the risk of electrocution.

Always disconnect this product from the power source before cleaning it or replacing the fuse.

Avoid direct eye exposure to the light source while the product is on.

Make sure the power cord is not crimped or damaged.

Never disconnect this product from power cord by pulling or tugging on the cord.

Make sure there are no flammable materials close to the unit while operating.

Do not touch this product’s housing when operating because it may be very hot.

Always make sure that the voltage of the outlet to which you are connecting this product is within the range stated on the decal or rear panel of the product.

This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain or moisture.

Always install this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

Be sure that no ventilation slots on the unit’s housing are blocked.

Never connect this product to a dimmer.

Make sure to replace the fuse with another of the same type and rating.

Never carry this product from the power cord or any moving part.

The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product at higher temperatures.

In the event of a serious operating problem, stop using the unit immediately.

Never try to repair this product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.

This product is NFPA-certified fire retardant material.

Keep this User Manual for future consultation. If you sell this product to another user, be sure that they also receive this document.

Page 4 of 12

MotionFaçade™ LED User Manual (Rev. 10)

Image 4
Contents Page Table of Contents Before YOU Begin IconsProduct at a Glance Safety NotesThis product is NFPA-certified fire retardant material Introduction Product DimensionsProduct Overview AC Power Fuse ReplacementMounting Orientation RiggingConfiguration DMX OperationMenu Map Control Panel OperationConfiguration Standalone Sound-Active Mode Automatic Mode Master/SlaveChannel Function Value Setting DMX Channel Assignments and ValuesTechnical Specifications Technical InformationContact Us Returns General Information