Cooper Lighting FCTS130 instruction manual Assembling the fixture, How to use

Page 4

insert the bulb under this retainer clip. Repeat the process on the opposite side, then push the bulb into the bulb socket (G).

Step 4: Replace the door frame and lens assem-

G

bly and secure it by tightening the knob

 

that was loosened in Step 1.

 

Step 5: Repeat process for second fixture head.

 

Assembling the fixture

Step 1: Remove the pole and stand assembly from the box. Loosen the locking knob

located just above the stand assemblyH and open the legs to the full open posi-

tion. Secure the locking knob and place the pole and stand assembly on

a flat surface (H).

Step 2:To mount each light fixture to the light bar, first loosen and remove wing knobs

from both bolt holes located on the light assembly bar. Place each bolt through the “U”brackets on the light fixtures, then through the light assembly bar. When positioned correctly, the small hole in the center of the light assembly bar should be fac- ing up. Place the wing knobs in position (under the bar)

and tighten until secure. NOTE: The metal washer should be placed between the bolt and “U”bracket, and the wave washer between the “U”bracket and light bar. The other flat washer should be positioned between the light bar and wing knob (I).

Step 3:To attach the light assembly bar to the adjustable pole, position the hole in the mid-

dle of the light assembly bar over the threaded screw on the pole. NOTE: The large hole in the light assembly bar should be facing down to fit over the nut already in place. Once the light assembly bar is in place, position the hole

in the Y-connector over the threadedJ screw. Secure with attachment knob (J).

How to use

Step 1: Plug the light into any 120 Volt standard receptacle. The on/off switches are locat- ed on the back of each fixture head and

are independent from each other. Depress the switch once to turn the light on; depress the switch again to turn the light off.

Step 2: The lights can be rotated in a forward,

K

backward, left, or right angle as needed

 

for light direction (K).

 

Step 3: Adjust the tripod stand to the desired

 

height by loosening and tightening the

 

locking collars on the pole (L).

 

14

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Instrucciones Directives What’s included What you needWhat to know Important Read Before Using Installing the bulbHow to use Assembling the fixtureFive-Year Limited Warranty La Vista Drive, Burlington, NC 27215 USA Qué se incluye Qué se necesitaQué se necesita saber Desensamblar el artefacto anulará la garantía Instalación del focoEnsamblaje del portalámparas Modo de empleoCinco años de garantía limitada La Vista Drive, Burlington, NC 27215 USA Ce qui est compris dans cet ensemble Ce dont vous avez besoinCe qu’il faut savoir Installation de l’ampoule Assemblage de l’appareil Garantie limitée de cinq ans 11/00

FCTS130 specifications

Cooper Lighting's FCTS130 is a cutting-edge lighting solution designed to meet the demands of modern architectural and commercial spaces. As part of Cooper Lighting's extensive range of energy-efficient products, the FCTS130 series stands out for its combination of advanced features, intelligent design, and enhanced functionality.

One of the main features of the FCTS130 is its exceptional energy efficiency. This model uses state-of-the-art LED technology, which significantly reduces energy consumption compared to traditional lighting options. By offering a longer lifespan and lower heat output, the FCTS130 helps organizations cut down on their maintenance costs while promoting sustainable practices.

The FCTS130 is available in various lumen packages, making it versatile enough to cater to different applications, from retail environments to office spaces and industrial settings. Its adjustable lumen output provides flexibility, allowing users to tailor the brightness to meet specific lighting requirements.

Another notable characteristic is the FCTS130's sleek and modern design. With its slim profile and unobtrusive aesthetics, this fixture seamlessly integrates into any interior design scheme. It offers both recessed and surface-mounted installation options, making it easy to incorporate into various architectural layouts without compromising style or functionality.

The FCTS130 is equipped with advanced optics that ensure uniform light distribution, minimizing shadows and providing a pleasing illumination experience. This feature is particularly essential in commercial spaces, where proper lighting can enhance product visibility and create inviting atmospheres.

Furthermore, the FCTS130 incorporates smart technology compatibility, allowing users to connect to smart lighting systems for optimized control. Features like dimming capabilities and occupancy sensors can be integrated, enabling users to maximize energy savings and enhance user comfort through tailored lighting solutions.

Durability is also a hallmark of the FCTS130. Constructed with high-quality materials and designed to withstand the rigors of daily use, this lighting fixture is built to last. It is also available in various color temperatures, offering options that range from warm to cool light, ensuring that it can fit the mood and function of any space.

In summary, the Cooper Lighting FCTS130 is a high-performance lighting fixture that excels in energy efficiency, design versatility, and advanced functionality. Its combination of contemporary aesthetics, smart technology integration, and robust construction makes it an ideal choice for architects, contractors, and facility managers looking for reliable and sophisticated lighting solutions.
Top Page Image Contents