Cooper Lighting MV4MR specifications Frame, Collar, Lamp Module, Housing, Gaskets, Bar Hangers

DESCRIPTION

Recessed downlight luminaire with 2 inch square regressed pinhole aperture utilizing a low voltage MR16 tungsten-halogen lamp. Modular platform can be reconfigured from below the ceiling to accept a broad range of lamp modules and optical elements. Platform is suitable for direct contact with insulation and 2x8 residential construction. Platform + module + element combination supports various lamp beam spreads for desired optical distribution with excellent light control and low aperture brightness.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

IRIS®

Type

Date

Frame

Galvanized steel plaster frame with integral bar hanger receivers. Setscrews provide positive horizontal locking.

Collar

Matte black steel collar adjusts vertically for 1/2" - 1" thick ceilings and can be rotated +/- 7.5° thru the aperture. Integral gun sights facilitate the use of guide strings or laser lines. Shipped with a paint overspray protector installed in the collar.

Lamp Module

Installed or removed thru the aperture or from the top and allows lamp orientation at 0°, 90°, 180° and 270° positions.

Housing

Double wall aluminum housing painted matte black for a visually dark interior. All fasteners are captive.

Gaskets

Closed cell gaskets achieve restrictive airflow requirements without additional caulking.

Bar Hangers

Captive preinstalled bar hangers adjusts from 8-1/2" to 24" wide; pass thru feature allows shortening without removal. Captive nail penetrates standard and engineered lumber. Mounting flange levels platform with ceiling. Integral clip attaches directly to t-bar.

Splay

Diecast aluminum splay has truncated paramid with regressed square aperture providing minimal ceiling presence. Can be painted to match ceiling finish. Mousetrap type springs pull flange tight to ceiling. Light trap eliminates spill light at edge of flange. May also be installed rimless using optional plastering lathing ring. Provided with both straight and angle cut parabolic shielding cone, shipped with angle cut version installed.

Junction Box

(7)1/2" trade size pry outs, (3) integral clamps for non-metallic cable. Rated for (4) #12 thru branch circuits. Wago® type push wire connectors for field connections

Thermal Protector

Self-resetting thermal protector protects against improper lamping.

Transformer

Integral dual output toroidal magnetic transformer, 120V 50/60Hz input, 12V nominal 75VA maximum output. Separate output for circuits controlled by dimmers compensates for losses in dimmers, improves color temperature and lumen output.

Lamp Capsule

Ceramic GX5.3 lamp holder mounts to an aluminum heat sink to dissipate heat. Connects to the transformer with electrical quick connects. Accepts 2 lenses, filters or optional lamp snoot.

Code Compliance

Thermally protected, IP labeled, cULus listed for damp locations and ASTM-E283 AIRTITE(tm).

Suitable for direct contact with insulation.

P408ICAT

MV4MR

E4RPIN

50W MR16 Tungsten-Halogen

2 Inch Square Dowlight
	Cutout=5-3/16”
	(132mm)
14-9/16”	4-5/16”
	(126mm)
(369mm)
	8-1/2”
4-9/16”	(216mm)
(115mm)

2“ (51mm)

5-3/4“

(146mm)

O R D E R I N G I N F O R M AT I O N : C o m p l e t e u n i t c o n s i s t s o f p l a t f o r m , l a m p m o d u l e a n d o p t i c a l e l e m e n t .

Platform Lamp Module Optical Element Flange Accessories

P408ICAT MV4MR

ENERGY DATA
Lamp Wattage	Input Power	Input Current
(Nominal)	(Watts)	(Amps)
20	21	0.17
35	37	.031
37	39	0.32
42	44	0.37
50	53	0.44

P408ICAT = 4” Square Aperture IC Housing

MV4MR = MR16

Vertical Lamp

Module, 120V Input

E4RPIN = 2” Square	Blank] = Self Flanged,	PLR4x4 = Plaster Lathing Ring
Aperture Regressed	Matte White Flange	(For Use With E4PINRL Only)
Pinhole	RL = Rimless, Matte	RLA4x4 = Rimless Adapter
	White Flange	(For Use With E4PINRL Only)

LSA16 = Matte black lamp snoot accessory L Series - Filter Media For MR16 lamps (See Accessories specification sheet)

Specifications and Dimensions subject to change without notice.	ADI070185
Consult your representative for additional options and finishes.	11/16/2007 11:28:04 AM